> -----Original Message----- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Charles Mills > Sent: Saturday, December 19, 2009 8:18 AM > To: IBM-MAIN@bama.ua.edu > Subject: Re: C++ <fstream>, <iostream> and z/OS <Snipped> > > write an assembler program with FIND, then call this > > With FIND ... and NOTE and POINT (and FIND before POINT in case you jumped > concatenations) and do-it-yourself deblocking and below-the-line GETMAINs > and moving "model" blocks into GETMAIN storage and ...
Or you could use the newer and much more flexible DESERV macro interface, which will let you deal with PDSE as well as PDS with the same code. IIRC (it's been a while since I looked at that code) it can all or almost all be above the line, but don't quote me on that. I've been known to mis-remember such details before. Anyway, it's worth a look if you have to go down the assembler road. HTH Peter This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
