LPAR1 is not capped. It can take 100% of the CPU if LPAR 2 is idle and it needs 
it. If LPAR 2 is active, then LPAR 1 can take up to 80% and LPAR 2 20%.  If 
LPAR 1 is idle, then LPAR 2 can take up to the hard cap value. 

You did not mention the capping value for LPAR2. If, for example, you have hard 
capped LPAR 2 at, say, 150 mips, then it can never take more than that. So, 
LPAR 1 could take 85% and LPAR 2 15% if both are competing for the CPU.   

I assume you really meant to say MSU's instead of MIPS. MIPS is not a valid 
metric in this context.  

Hard cap, soft cap, and weights are all different controls, but all three need 
be considered to manage your machine. 

HTH and good luck. 


 


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of 
Tommy Tsui
Sent: Wednesday, February 10, 2010 8:59 AM
To: IBM-MAIN@bama.ua.edu
Subject: cpu capping question

Hi all,
I have following question on CPU hard capping
LPAR1  initial capping=No   CPU weight 80  = 800mips
LPAR2  initial capping=Yes CPU weight 20  = 200mips
assume CPU has 1000mips

my question is, for LPAR2 the maximum CPU utilization is 200 mips with
hard capping but how about LPAR1? the maximum CPU utilization is
800mips or more than 800mips with initial capping=no?
I knew that soft capping is more suitable for this case with defined
capacity & weight.

any help will be appreciated
 
NOTICE: This electronic mail message and any files transmitted with it are 
intended
exclusively for the individual or entity to which it is addressed. The message, 
together with any attachment, may contain confidential and/or privileged 
information.
Any unauthorized review, use, printing, saving, copying, disclosure or 
distribution 
is strictly prohibited. If you have received this message in error, please 
immediately advise the sender by reply email and delete all copies.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to