-----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Wayne Driscoll Sent: Wednesday, February 10, 2010 4:09 PM To: IBM-MAIN@bama.ua.edu Subject: Re: IPCS - How to find Load Point
To find the Load Point of a module, I have used field XTLMSBAD - Address of main Storage Block, offset x'0C' into the XLST structure. I use this in conjunction with XTLMSBLN a 3 byte field at offset 9 that is the length of the main storage block. Note that this block is NOT part of the intended program interface, so changes are possible to this block. <SNIPPAGE> Thanx. I had looked at that (in storage), and it just didn't seem right to me (because I misread it thanks to the color it showed up in), so I didn't use it. But then when I did the math, sure enough it was the Load Point, and a "?" and there I was, the Load Point. Again, thank you. Regards, Steve Thompson ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
