Service replaced a 3590 tape drive but we cannot vary the drive online. In the past the only way we could get the drive back online was to re-cycle the control unit.
Has anyone figure out how to bring the drive online without a re-cycle of the control unit? The other drives on the controller are working. V C04,ONLINE IEE025I UNIT 0C04 HAS NO PHYSICAL PATHS V PATH(C04,45),ONLINE IEE302I PATH(0C04,45) ONLINE V PATH(C04,47),ONLINE IEE302I PATH(0C04,47) ONLINE V C04,ONLINE IEE025I UNIT 0C04 HAS NO PHYSICAL PATHS D M=DEV(C04) IEE174I 13.18.32 DISPLAY M 104 DEVICE 0C04 STATUS=OFFLINE CHP 45 47 ENTRY LINK ADDRESS .. .. DEST LINK ADDRESS 0D 0D PATH ONLINE Y Y CHP PHYSICALLY ONLINE Y Y PATH OPERATIONAL Y Y PATHS NOT VALIDATED Bob This message (including any attachments) is intended only for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, notify us immediately by telephone and (i) destroy this message if a facsimile or (ii) delete this message immediately if this is an electronic communication. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
