I'm not sure that I really understand what you want. I have an OSA. It has three different IP addresses, depending on the stack accessing it. But you may want the z/OS operator command: D TCPIP,,NETSTAT,HOME which on one of my systems reports:
RESPONSE=LIH1 EZZ2500I NETSTAT CS V1R10 TCPIP 011 HOME ADDRESS LIST: ADDRESS LINK FLG 10.170.30.8 OSA00L P 10.170.30.9 OSA52L 10.170.30.10 VIPA1L 192.168.151.1 IQDFCL 192.168.152.1 IQDFDL 127.0.0.1 LOOPBACK 6 OF 6 RECORDS DISPLAYED END OF THE REPORT >From this I can do D TCPIP,,NETSTAT,DEVL which on my system gets (truncated >down): DEVNAME: OSA00 DEVTYPE: MPCIPA DEVSTATUS: READY CFGROUTER: NON ACTROUTER: NON LNKNAME: OSA00L LNKTYPE: IPAQENET LNKSTATUS: READY SPEED: 0000001000 IPBROADCASTCAPABILITY: NO ARPOFFLOAD: YES ARPOFFLOADINFO: YES ACTMTU: 8992 VLANID: NONE VLANPRIORITY: DISABLED READSTORAGE: GLOBAL (4096K) INBPERF: BALANCED SECCLASS: 255 MONSYSPLEX: NO BSD ROUTING PARAMETERS: >From which I can do: D NET,ID=OSA00,E with the results: IST097I DISPLAY ACCEPTED IST075I NAME = OSA00, TYPE = TRL MAJOR NODE IST1314I TRLE = OSA1000 STATUS = ACTIV CONTROL = MPC IST314I END >From which I know to do: D NET,ID=OSA1000,E which gets me the results: IST075I NAME = OSA1000, TYPE = TRLE IST486I STATUS= ACTIV, DESIRED STATE= ACTIV IST087I TYPE = LEASED , CONTROL = MPC , HPDT = YES IST1954I TRL MAJOR NODE = OSA00 IST1715I MPCLEVEL = QDIO MPCUSAGE = SHARE IST1716I PORTNAME = OSA00 LINKNUM = 0 OSA CODE LEVEL = 077C IST1577I HEADER SIZE = 4096 DATA SIZE = 0 STORAGE = ***NA*** IST1221I WRITE DEV = 1001 STATUS = ACTIVE STATE = ONLINE IST1577I HEADER SIZE = 4092 DATA SIZE = 0 STORAGE = ***NA*** IST1221I READ DEV = 1000 STATUS = ACTIVE STATE = ONLINE IST1221I DATA DEV = 1002 STATUS = ACTIVE STATE = N/A IST1724I I/O TRACE = OFF TRACE LENGTH = *NA* IST1717I ULPID = TCPIP IST1815I IQDIO ROUTING DISABLED IST1918I READ STORAGE = 4.0M(64 SBALS) IST1757I PRIORITY1: UNCONGESTED PRIORITY2: UNCONGESTED IST1757I PRIORITY3: UNCONGESTED PRIORITY4: UNCONGESTED IST1801I UNITS OF WORK FOR NCB AT ADDRESS X'091DB010' IST1802I P1 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0 IST1802I P2 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0 IST1802I P3 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0 IST1802I P4 CURRENT = 0 AVERAGE = 3 MAXIMUM = 105 IST1221I DATA DEV = 1003 STATUS = RESET STATE = N/A IST1724I I/O TRACE = OFF TRACE LENGTH = *NA* IST1500I STATE TRACE = OFF IST314I END Hope the above was of some use to you. -- John McKown Systems Engineer IV IT Administrative Services Group HealthMarkets® 9151 Boulevard 26 . N. Richland Hills . TX 76010 (817) 255-3225 phone . (817)-691-6183 cell john.mck...@healthmarkets.com . www.HealthMarkets.com Confidentiality Notice: This e-mail message may contain confidential or proprietary information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. HealthMarkets® is the brand name for products underwritten and issued by the insurance subsidiaries of HealthMarkets, Inc. -The Chesapeake Life Insurance Company®, Mid-West National Life Insurance Company of TennesseeSM and The MEGA Life and Health Insurance Company.SM > -----Original Message----- > From: IBM Mainframe Discussion List > [mailto:ibm-m...@bama.ua.edu] On Behalf Of HELIO > Sent: Friday, September 03, 2010 8:36 AM > To: IBM-MAIN@bama.ua.edu > Subject: Identify IP OSA > > All list, > > I need to identify the IP of an OSA. Does anyone know the > command that I > can used? > > > Thanks. > -- > > *Hélio José da Silva > ***// > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html