John,
Thank you for the explanation.
In fact my both questions can be rephrased to the following:
Is given chpid or CU port able to work in HPF and non-HPF mode simultaneously?

Your expectations (and mine too) are that yes.


Regards
--
Radoslaw Skorupka
Lodz, Poland


W dniu 2011-03-30 06:36, John Ticic pisze:
Radoslaw,

my understanding is that zHPF is negotiated between z/OS and the DSS
CU if all the channels in the path group are FEx2 or FEx4. So, if this is
the case, then I/O between that z/OS LPAR and that CU can use zHPF.

So, my take on Q1 is that the host that has FEx2/FEx4 will be able to
use zHPF and the other host will not be able to.

In Q2, the Host can negotiate a zHPF connection to one DASD and not
to the other.

These are only my expectations and I would be interested in your
findings - especially if they are different.

SMF 73 (RMF Channel stats) will give you some nice information on how
many I/Os are using transport mode.
SMF 74.5 (Rank statistics) will give you detailed zHPF information per
device (starting with z/OS 1.12) (probably Vendor DSS specific).

John

Quotation from some IBM TechDoc:

"zHPF is supported on FICON Express2 (FEx2) and FICON Express4
(FEx4)
channels.  It is not supported on FICON Express channels.
"I/Os executed on path groups with a mix of FICON Express and FICON
Express2 or FICON Express4 channels in the same path group will not
be
eligible to convert to zHPF. For zHPF, all the channels in the same
channel path group have to be FEx2 or FEx4. "

The above is clear in scenario with one host and one CU.
What about many-to-many scenarios?

Q1: The following scenario: two host connected to single CU, via
switch.
Same channel adapter in CU. One host is zHPF capable, the other is
not
(FICON Express "1"). Will zHPF work between CU and first host?

Q2: Another scenario: zHPF-capable host connected via switch to two
different DASD boxes. First DASD is zHPF-capable, the second is not.
Both DASDs are connected to the same CHPIDs.
Will zHPF be used for communication between host and first CU?

Any clue?

Regards
--
Radoslaw Skorupka
Lodz, Poland


--
Tre tej wiadomoci moe zawiera informacje prawnie chronione Banku 
przeznaczone wycznie do uytku subowego adresata. Odbiorc moe by jedynie 
jej adresat z wyczeniem dostpu osób trzecich. Jeeli nie jeste adresatem 
niniejszej wiadomoci lub pracownikiem upowanionym do jej przekazania 
adresatowi, informujemy, e jej rozpowszechnianie, kopiowanie, rozprowadzanie 
lub inne dziaanie o podobnym charakterze jest prawnie zabronione i moe by 
karalne. Jeeli otrzymae t wiadomo omykowo, prosimy niezwocznie 
zawiadomi nadawc wysyajc odpowied oraz trwale usun t wiadomo 
wczajc w to wszelkie jej kopie wydrukowane lub zapisane na dysku.

This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorised to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive.
BRE Bank SA
ul. Senatorska 18
00-950 Warszawa
www.brebank.pl

Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru Sdowego, nr rejestru przedsibiorców KRS 0000025237
NIP: 526-021-50-88
Wedug stanu na dzie 16.07.2010 r. kapita zakadowy BRE Banku SA (w caoci wpacony) wynosi 168.248.328 zotych.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to