>From SC26-7298-01 (System/390 Command Reference 2105 Models E10, E20, F10, and F20)
With ESCON adapters, you can have up to 32 connections, each with up to 64 | logical paths. | So you most likely have eight paths to a device, times eight LPARS... -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Patrick Falcone Sent: Wednesday, January 25, 2012 2:36 PM To: IBM-MAIN@bama.ua.edu Subject: Re: CU Resources Exceeded Check SG24-6266-01, although FICON there are ESCON references in there... what Joel said.... ________________________________ From: SUBSCRIBE IBM-MAIN Tom Trainor <thomas.j.trai...@exxonmobil.com> To: IBM-MAIN@bama.ua.edu Sent: Wednesday, January 25, 2012 12:44 PM Subject: CU Resources Exceeded After adding devices and two (2) LPARS to IOCDS on 2066, unable to IPL the last two(2) of ten (10) LPARS. The last two (2) are NOT necessarily LPAR numbers "9" and "A" but are the last two (2) of the ten (10) that are activated. Within "Channel Problem Determintation" on 2066 SE the message in the "Analyze Serial Link Status" is: "CU Resources Exceeded - Init Failure - No Resources Available". Has anyone seen this or know what the problem might be. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN NOTICE: Confidential message which may be privileged. Unauthorized use/disclosure prohibited. If received in error, please go to www.td.com/legal for instructions. AVIS : Message confidentiel dont le contenu peut être privilégié. Utilisation/divulgation interdites sans permission. Si reçu par erreur, prière d'aller au www.td.com/francais/avis_juridique pour des instructions. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
