Thanks for your response. How did you create the formdef? I am using the supplied forms and can't find the correct tool to do this.
Best Regards Sheldon Davis -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Wissink, Brad [ITSYS] Sent: Wednesday, October 31, 2007 8:21 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: COPYMARK when using PSF printing on an Infoprint 65000 We use an overlay to place a small shaded box in each corner of the separator page. The overlay is specified in a formdef which is pointed to by the JOBHRDR DD statement in the PSF proc. Below is an example of the JCL //JOBHDR OUTPUT PAGEDEF=SY000L, /* JOB header separator pagedef */ // FORMDEF=SY000F /* JOB header separator formdef */ //JOBTLR OUTPUT PAGEDEF=SY000L, /* JOB trailer separator pagedef */ // FORMDEF=SY000F /* JOB trailer separator formdef */ //* //PRT30 CNTL //PRT30 PRINTDEV TRACE=NO, /* CREATE INTERNAL TRACE ENTRIES*/ // JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR OUTPUT */ // JOBTRLR=*.JOBTLR /* JOB TRAILER SEPARATOR OUTPUT */ //PRT30 ENDCNTL Brad Wissink Information Technology Services Iowa State University 515-294-3088 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Sheldon Davis Sent: Wednesday, October 31, 2007 11:35 AM To: IBM-MAIN@BAMA.UA.EDU Subject: COPYMARK when using PSF printing on an Infoprint 65000 Hi I have configured PSF to print on an Infoprint 65000 using IPDS. Everything works fine except one small problem with the Job separator. In order to separate the jobs our print operator requires marking on the perforation of the job separator page. If anyone has succedded in doing this I would appreciate to know how. Below are my JES2 definitions: RT3 UNIT=,STATUS=INACTIVE,BURST=NO,CKPTLINE=0, CKPTMODE=PAGE,CKPTPAGE=3,CKPTSEC=0,CREATOR=, DEVFCB=,DEVFLASH=****,FCB=****,FORMS=(STD,,,, ,,,),FSS=FSS1,HONORTRC=YES,JOBNAME=,LASTFORM= STD,LIMIT=(0,*),COPYMARK=JOB,MARK=YES, MODE=FSS,NEWPAGE=DEFAULT,NPRO=99,PAUSE=NO, PLIM=(0,*),PRESELCT=YES, PRMODE=(LINE,PAGE,SOSI1),QUEUE=O,RANGE=(J1, 999999),ROUTECDE=(LOCAL),SEP=YES, SEPCHARS=DEFAULT,SEPDS=NO,SETUP=HALT,SPACE=, TRACE=NO,TRANS=DEFAULT,TRKCELL=YES,UCS=0, UCSVERFY=NO,VOLUME=(,,,),WRITER=, WS=(W,Q,R,PRM,LIM/F,UCS,FCB),FSAROLTR=YES Thanks in advance Sheldon Davis ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html