I did a major boob! I was creating some LVM under Linux SLES 9 on a z/VM machine.
I ran the mkinitrd and zipl commands after updating the /etc/zipl.conf. I incorrectly updated the dasd= entry in the zipl.conf file parameters string. It should have been dasd=100-106 but I set it to 101-106. This seems to have moved the offset for the devices such that at boot time it gets an incorrect blocksize on the root=/dev/dasdb1 Is there anyway I can overlay this parameter at Linux boot time. Thanks. This e-mail message and any attachments may contain confidential, proprietary or non-public information. This information is intended solely for the designated recipient(s). If an addressing or transmission error has misdirected this e-mail, please notify the sender immediately and destroy this e-mail. Any review, dissemination, use or reliance upon this information by unintended recipients is prohibited. Any opinions expressed in this e-mail are those of the author personally. Murray Robinson ACI Worldwide, Inc. [EMAIL PROTECTED] (402)-778-1930 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
