On Wed, 4 Feb 2009 12:21:58 -0600, Chase, John <jch...@ussco.com> wrote: >> >> If SMP/E is complaining that PSF isn't in the GLOBAL zone, you will >need >> to RECEIVE it back into the GLOBAL zone then you can apply it. If you >> are using the same CSI you used the first time you installed PSF, you >> will need to use the REDO and SELECT parameters like I mentioned >before. > Or, (re-RECEIVE, yes) and create a new DLIB/TARGET pair and APPLY (and ACCEPT ad-lib) into that.
>If the product has been ACCEPTed and you haven't applied subsequent >maintenance that is not also ACCEPTed, you might consider the SMP/E >BUILDMCS command, then RECEIVE, APPLY and ACCEPT its output deck. > Will BUILDMCS unwind the DLIBs into SMPMCS? I didn't know that. RELFILE/LKLIB format, I'd guess? -- gil ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html