Please issue TSO command 'RVARY LIST' on both LPARs. There should be no indication of data sharing in the response on either system. That's what I see in my basic sysplex.
Sharing options are indicated in bit flags in module ICHRDSNT. Even though you are using the same RACF data base as named in ICHRDSNT, if you have two different copies of the module, the bits may be different in the two versions. That is, LPAR2 may be set to allow sharing, while LPAR1 is not. . . JO.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 626-302-7535 Office 323-715-0595 Mobile jo.skip.robin...@sce.com "Staller, Allan" <allan.stal...@kb M1.COM> To Sent by: IBM IBM-MAIN@bama.ua.edu Mainframe cc Discussion List <ibm-m...@bama.ua Subject .edu> RACF Newbie question 05/07/2009 02:17 PM Please respond to IBM Mainframe Discussion List <ibm-m...@bama.ua .edu> I am in the process of setting up a basic sysplex. (no Coupling Facility available) from 2 separate monoplexes. In the process of attempting to share the RACF database (in non data-sharing mode) I am seeing something strange. On LPAR1 of the SYSPLEX RACF comes up with no indication of data sharing mode. On LPAR2 of the same sysplex, message IRRX005I is issued indicating that LPAR2 is in the desired mode. ICHRDSNT has been validated as correct (and identical) on both LPARs. I have verified that the same database is in use. In this particular case, LPAR1 was the 1st LPAR IPL'ed into the sysplex. Just to test I re-initialized the sysplex with LPAR2 as the 1st system. Same results. i.e. Message IRRX005I only appears on LPAR2. Is message IRRX005I to be expected on all LPARs in the RACFplex? If so, can somebody point me in the right direction to get both LPARs to issue IRRX005I? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html