Robert, it's the same media type, as long as the dataclass specifies (or allows) a recording format other than EFMT1, everything will be fine.
>>> "Robert A. Rosenberg" <hal9...@panix.com> 05/29/09 5:07 PM >>> Based on the above you should also stock the ATL with EFMT2/3 media so you can continue to write to the ATL (since the EFMT1s are Read-Only) as well as seeing about migrating the contents of the EFMT1 media to EFMT2/3 media so you can replace the EFMT1 media with EFMT2/3 media that can be written (this is of course only needed if you are running out of storage slots in the ATL). ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html CONFIDENTIALITY/EMAIL NOTICE: The material in this transmission contains confidential and privileged information intended only for the addressee. If you are not the intended recipient, please be advised that you have received this material in error and that any forwarding, copying, printing, distribution, use or disclosure of the material is strictly prohibited. If you have received this material in error, please (i) do not read it, (ii) reply to the sender that you received the message in error, and (iii) erase or destroy the material. Emails are not secure and can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by email. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
