Sounds like you were about to execute some operation that requires 'Service Mode' enabled first. If you use the 'SYSPROG' id, it is not the CE account id. You need a CE account to enable 'Service Mode' first. Fermat On Wed, Jun 3, 2009 at 7:57 AM, Roger Lowe <roger_l...@bigpond.com> wrote:
> On Tue, 2 Jun 2009 15:18:26 -0400, Neal Eckhardt < > neckha...@penntraffic.com> > wrote: > > >Ok, we just got a z9, and I'm browsing through the HMC stuff. I have > >accessed the HMC application through my web browser so I can capture > >some screen prints for updated documentation. > > > >While playing around, I tried to IPL my test system remotely. I got > >the message: > > > >The target does not have service status, but disruptive task is in > >service role. > > > >This cryptic message doesn't tell me much. Is it possible to IPL > >remotely or is that my problem? > > > Neal, > Do you have a firewall in place? If so, you need to allow > communication between the HMC and SE. There are a number of ports that are > used by a remote HMC for communications and they are described in Appendix > C > of the "Hardware Management Console Operations Guide" (SC28-6873) > . > Hope this helps > . > Roger > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
