In case you are not on it, there is a SAUsers group on Yahoo! Dave, In case you are not on it, there is a SAUsers group on Yahoo! groups:
http://tech.groups.yahoo.com/group/SAUsers/ Group Email Addresses: Post message: saus...@yahoogroups.com Subscribe: sausers-subscr...@yahoogroups.com Unsubscribe: sausers-unsubscr...@yahoogroups.com List owner: sausers-ow...@yahoogroups.com Mark T. Regan, K8MTR CTO1 USNR-Retired (1969-1991) ________________________________ From: "Jousma, David" <david.jou...@53.com> To: IBM-MAIN@bama.ua.edu Sent: Tuesday, June 16, 2009 1:53:44 PM Subject: Tivoli System automation(SA390) All, I've taken a quick look through the books, but nothing leaps out at me. We are a SA390 shop for automation. The problem we have is STC's under SA control that get manually shutdown outside of SA390 control can sometime cause problems with automation. I'm aware that I could logon to SA390, and using the panels shutdown a task, and then start it back up. What I am wondering is: Is there some sort of built-in function to do this all from the console? We find(and I am guilty too), that in the heat of the moment, no one bothers to recycle STC's because you have to logon to SA390 to do it. Am I making sense? Making up an example, I'm thinking something like %SA390,$PJES2 where %SA390 is some sort of CLIST, or builtin SA function that issues the proper SA commands to "tell" SA390 to shutdown JES2(or any other task for that matter). Thanks in advance, Dave _________________________________________________________________ Dave Jousma Assistant Vice President, Mainframe Services david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB1G p 616.653.8429 f 616.653.8497 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
