On Fri, 17 Jul 2009 11:09:26 +0200, R.S. <r.skoru...@bremultibank.com.pl> wrote:
>This is follow-on of my EDGINERS problem. >IECIOSxx member was forgot during system migration. >The only problem was with EDGINERS on 3490E-C22 drives (rarely used >nowadays). >I fixed it by setting >MIH TIME=30:00,DEV=(devnum_addresses) > >However I did some RTFM about parameters in the IECIOSxx member. > >My question is: >What are typical/suggested/ROT entries in IECIOSxx member? > >I know, it depends on the hardware. >In my case: some DASD boxes (various vendors, all made after 2000, >FICON-attached), 3592, 3590, 3490E. > >Any clue? If you are speaking about the MIH time, in the old days, the time had to be set just a bit longer than the time needed to recycle the machine. ( in case of automatic recovery by the ucode) Was that your question ? Bruno Sugliani zxnetconsult(at)free(dot)fr http://zxnetconsult.free.fr ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html