I tried on different LPARs. Mark, I noticed the item you mentioned, but it was not processing. Also, I entered R, NO and I entered cancel on other tests. All Tests behaved the same way - no multi - processing. One coworker suggested that maybe we need to specify SER=(H38479,xxxxxx,xxxxxx,xxxxxx) ??? That seems unreasonable, but I will test that option later today.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mary Anne Matyaz Sent: Tuesday, January 08, 2013 12:48 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: FREEVOL=EOV on R1.13 I believe the jobs need to be on different systems...doc seems to indicate that. MA On Tue, 8 Jan 2013 11:45:29 -0600, Mark Zelden <m...@mzelden.com> wrote: >I haven't tried it. Are you sure it wasn't processing? Note the list in >"JOB 2" did not >include H38479 which had already been dismounted when the job started. >H25146, the 2nd volume was dismounted at 23:10, but someone already >replied "NO" to IEF235D which canceled JOB 2. > >-- >Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS >mailto:m...@mzelden.com >Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html >Systems Programming expert at http://expertanswercenter.techtarget.com/ > > > >On Tue, 8 Jan 2013 17:27:21 +0000, Mingee, David ><david.min...@libertymutual.com> wrote: > >>Yes, see below: >>JOB 1 >>23.01.48 JOB25740 $HASP373 DRAHDLM2 STARTED - INIT 5 - CLASS 3 - SYS SYST >> >>23.01.48 JOB25740 IEF403I DRAHDLM2 - STARTED - TIME=23.01.48 >> >>23.01.48 JOB25740 IEF233A M >>0A94,H38479,,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.05.24 JOB25740 IEC502E K >>0A94,H38479,SL,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.05.24 JOB25740 TMS014 IEC502E K >>0A94,H38479,SL,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.05.24 JOB25740 IEC501A M >>0A94,H25146,SL,COMP,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.10.18 JOB25740 IEC502E K >>0A94,H25146,SL,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.10.18 JOB25740 TMS014 IEC502E K >>0A94,H25146,SL,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >>23.10.19 JOB25740 IEC501A M >>0A94,H25696,SL,COMP,DRAHDLM2,S04,ICAS.CAD.PREMS.THRU1212.V1TAPE >> >>//S04 EXEC PGM=EZTPA00 >>//SYSPRINT DD SYSOUT=H >>//SYSSNAP DD SYSOUT=H >>//SYSOUT DD SYSOUT=H >>//SYSUDUMP DD SYSOUT=H >>//SORTWK01 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK02 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK03 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK04 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//EZTVFM DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//FILEA DD DSN=ICAS.CAD.PREMS.THRU1212.V1TAPE,DISP=SHR, >>// FREEVOL=EOV >>//FILEC DD DSN=GRT.GIOIDXM.PREMS.THRU1212.V1, >>// DISP=(NEW,DELETE),DATACLAS=DSORGPSE, >>// DCB=(RECFM=VB,LRECL=1078,BLKSIZE=0), >>// UNIT=DISK,SPACE=(CYL,(3300,1100),RLSE) >> >>JOB 2 >>23.06.07 JOB25741 $HASP373 DRAHDLM3 STARTED - INIT 7 - CLASS 3 - SYS SYST >> >>23.06.07 JOB25741 IEF403I DRAHDLM3 - STARTED - TIME=23.06.07 >> >>23.06.07 JOB25741 IEF690I FOLLOWING VOLUMES UNAVAILABLE TO DRAHDLM3 S04 192 >> >> 192 IEF690I H25146 H25696 H26646 H26772 H39385 H46181 H27224 >> H28986 >>23.06.07 JOB25741 *166 IEF235D DRAHDLM3 S04 WAITING FOR VOLUMES. TO CANCEL >>WAIT REPLY 'NO' >>23.07.12 JOB25741 R 166,NO >> >>23.07.12 JOB25741 IEF251I DRAHDLM3 JOB CANCELLED >> >>23.07.12 JOB25741 - -----TIMINGS >>(MINS.)------ >>23.07.12 JOB25741 -STEPNAME PROCSTEP RC EXCP CONN TCB SRB >> CLOCK >> >>//S04 EXEC PGM=EZTPA00 >>//SYSPRINT DD SYSOUT=H >>//SYSSNAP DD SYSOUT=H >>//SYSOUT DD SYSOUT=H >>//SYSUDUMP DD SYSOUT=H >>//SORTWK01 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK02 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK03 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//SORTWK04 DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//EZTVFM DD UNIT=DISK,SPACE=(CYL,(50,100),RLSE) >>//FILEA DD DSN=ICAS.CAD.PREMS.THRU1212.V1TAPE,DISP=SHR >>//FILEC DD DSN=GRT.GIOIDXM.PREMS.THRU1212.V2, >>// DISP=(NEW,DELETE),DATACLAS=DSORGPSE, >>// DCB=(RECFM=VB,LRECL=1078,BLKSIZE=0), >>// UNIT=DISK,SPACE=(CYL,(4000,1100),RLSE) >> >> >> >>-----Original Message----- >>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] >>On Behalf Of Lizette Koehler >>Sent: Tuesday, January 08, 2013 11:41 AM >>To: IBM-MAIN@LISTSERV.UA.EDU >>Subject: Re: FREEVOL=EOV on R1.13 >> >>Could you provide the JCL you are using? >> >>Lizette >> >>> -----Original Message----- >>> From: IBM Mainframe Discussion List >>> [mailto:IBM-MAIN@LISTSERV.UA.EDU] On >>Behalf >>> Of Mingee, David >>> Sent: Tuesday, January 08, 2013 9:38 AM >>> To: IBM-MAIN@LISTSERV.UA.EDU >>> Subject: FW: FREEVOL=EOV on R1.13 >>> >>> Hi SME's >>> Has anyone successfully used the new KEYWORD FREEVOL=EOV >>> on z/OS R1.13. I read the manuals and must be missing something as >>> I cannot get 2 >>jobs to >>> read the same input multi volume tape. The second job waits on the >>> tape >>as in the >>> past. I would greatly appreciate advice. >> >>---------------------------------------------------------------------- >>For IBM-MAIN subscribe / signoff / archive access instructions, send >>email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >>---------------------------------------------------------------------- >>For IBM-MAIN subscribe / signoff / archive access instructions, send >>email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >---------------------------------------------------------------------- >For IBM-MAIN subscribe / signoff / archive access instructions, send >email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
