Resolved in a very few hours. That z9 ran for around 10 years. I'll never have another priority 1 issue. We are running on someone else's' z13 now. Any issues are their's.
> -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > Behalf Of Steve Beaver > Sent: Thursday, July 16, 2020 12:49 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: ICSF -- initializing a PKDS > > A SEV1 does get a lot of attention > > Sent from my iPhone > > I promise you I can’t type or > Spell on any smartphone > > > On Jul 16, 2020, at 14:11, Gibney, Dave <gib...@wsu.edu> wrote: > > > > Same here. My one and only priority 1 issue with IBM. When the z9BC was > brand new, I defined all 4 crypto cards as accelerators. Couldn't define my > master keys or get SSL working. (It had been working on the z800-0B1) > > We elected to go forward with the processor upgrade that Saturday. And I > called IBM, told them priority 1 and that I couldn't go into operation on > Monday without security. > > > > The answer was to redefine at least one crypto co-processor. > > > >> -----Original Message----- > >> From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > >> Behalf Of Carmen Vitullo > >> Sent: Thursday, July 16, 2020 11:05 AM > >> To: IBM-MAIN@LISTSERV.UA.EDU > >> Subject: Re: ICSF -- initializing a PKDS > >> > >> It's been a long time since I've INIT'd a PKDS, my config had a co > >> processor > >> installed and I had to have CSF running to INIT a PKDS and store the DES > >> master key > >> did you start CSF? > >> > >> > >> Carmen Vitullo > >> > >> ----- Original Message ----- > >> > >> From: "John McKown" <john.archie.mck...@gmail.com> > >> To: IBM-MAIN@LISTSERV.UA.EDU > >> Sent: Thursday, July 16, 2020 12:45:16 PM > >> Subject: ICSF -- initializing a PKDS > >> > >> This is for a very old z/OS 1.12 system running on a z9BC. CPACF is enabled > >> in the machine. There are no cryptographic coprocessors installed. I can > >> initialize the CKDS using the panel. But when I try to initialize the PKDS, > >> the panel displays "OPTION NOT ACTIVE". PF1 displays 'THE SELECTED > PANEL > >> OPTION IS NOT AVAILABLE WITH YOUR CURRENT SYSTEM > CONFIGURATION" > >> > >> Is this normal? Can I not use the PKDS on a system with only CPACF? Or do > I > >> need to enable some other option somewhere? > >> > >> Thanks. > >> > >> -- > >> People in sleeping bags are the soft tacos of the bear world. > >> Maranatha! <>< > >> John McKown > >> > >> ---------------------------------------------------------------------- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> > >> > >> ---------------------------------------------------------------------- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ----------------------------------------------------------------- > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN