If you go to the single object operations then click on tasks list and look for storage information. This will give you 2 tabs. One shows the storage on the box, amount allocated to HSA, amount allowed for customer use. There should also be the percentage still available. The next tab has what each active lpar has assigned. If there is an lpar that is deactivated, it will not show since that central storage is technically available. Hope this is what you are looking for and helps.
On Tue, Jul 29, 2025, 4:15 PM Steely.Mark < [email protected]> wrote: > This HMC is connected to a z14 - model 3907. I am trying to determine the > total installed memory, as well as > the amount currently in use and the available amount. > > I initially expected this information to be easy to locate, but I have > been unable to find it. I have reviewed > System Details and System Information, and have also checked under Single > Object Operations, but without success. > > I can view the Image Profile, which shows the allocated Central Storage > for an individual LPAR - but that only reflects memory assigned to that > specific partition. > > I also looked at the Default Activation Profile, where I found the > following: > Customer Storage (MB): 851968 (GB: 832) > > I believe this reflects the total installed central storage, but it > doesn't provide a breakdown of what is currently allocated or available. > > Any additional insight or guidance on where to find the total, used, and > available memory at the system level would be greatly appreciated. > > Thank You > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
