Greg,

Here's what I have fro those values:

/* ----------------------------------------------------- *
 * append_domain                                         *
 *  if not null then used to append to e-mail addresses  *
 *  that are specified without a domain.                 *
 *  Note: do NOT code the @ symbol - it will be added    *
 *        by default.                                    *
 * ----------------------------------------------------- */
 append_domain = null
/* ------------------------------------------------------ *
 * Define the Center, or NJE Node, where the SMTP         *
 * Server is running.                                     *
 *                                                        *
 * If the SMTP Server is running in the active Node then  *
 * no change is required as it is dynamically determined. *
 * ------------------------------------------------------ */
 Center      = sysvar('sysnode')
 From_Center = center
/* ----------------------------------------------------- *
 * Setup the From Default                                *
 * This section should be customized for each shop       *
 * or at least reviewed.  Interlink users must customize *
 *                                                       *
 * Note: if fromreq is enabled (non-zero) then           *
 *       from_default can be * and will cause the        *
 *       user specified from to be used for the sender   *
 * ----------------------------------------------------- */
   msgid = sysvar("sysicmd")":"
   if length(msgid) = 1 then
      msgid = sysvar("syspcmd")":"
   uid = sysvar('sysuid')
   atsignc = left(atsign,1)
   if from_center = center then
      from_default = uid||AtSignC||center"."domain
   else
      from_default = uid"%"from_center||AtSignC|| ,
          center"."smtp_domain
/* ----------------------------------------------------------- *
 * FromReq used to require a FROM e-mail address in the XMITIP *
 * command.                                                    *
 *                                                             *
 * Values:   0 - not required                                  *
 *           1 - required                                      *
 *           "a...@host.com"    - code in quotes to avoid      *
 *                                translation to upper case    *
 *                                                             *
 * If an address then an e-mail is sent to that address for    *
 * logging purposes.                                           *
 * ----------------------------------------------------------- *
 FromReq = 0
 /* FromReq = "n...@host.com" */
/* ----------------------------------------------- *
 * Restrict_Domain                                 *
 *    If null then no action.                      *
 *    If set then all e-mails sent must end with   *
 *       the specified domain.                     *
 * ----------------------------------------------- */
 restrict_domain = null
 /* restrict_domain = "host.com"  */

It doesn't explain why the DOMAIN name is not changing...


 *George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(561) 707-3496 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*


On Wed, Mar 5, 2014 at 12:19 PM, Greg Shirey <wgshi...@benekeith.com> wrote:

> There are several variables in XMITIP that can influence the value for
> SENDER.  Have you checked how your XMITIPCU member assigns the following:
> append_domain
> from_center
> from_default
> fromreq
> restrict_domain
>
>
> HTH,
> Greg Shirey
> Ben E. Keith Company
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of George Rodriguez
> Sent: Wednesday, March 05, 2014 9:50 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Problem Using XMITIP
>
> This is going to sound like a very strange question, but all of a sudden
> the SENDER card that generated by XMITIP is coming back as:
>
> Sender:   GRODRIG@PAL6.DOMAIN
>
> and the DOMAIN should be PALMBEACH.K12.FL.US <http://palmbeach.k12.fl.us/
> >.
>
> I would appreciate any help!
>
>  *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 (office)*
> *(561) 707-3496 (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>
> --
>
>
> *The District is participating in* *Take your Daughters and Sons To Work
> Day <
> http://news.palmbeach.k12.fl.us/pao/2014/02/20/school-district-take-our-daughters-and-sons-to-work-day-thursday-march-6-2014/>
> on*  *Thursday, March 6, 2014.*
>
> *Disclaimer: *Under Florida law, e-mail addresses are public records. If
> you do not want your e-mail address released in response to a public
> records request, do not send electronic mail to this entity. Instead,
> contact this office by phone or in writing.
>
>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*The District is participating in* *Take your Daughters and Sons To Work 
Day 
<http://news.palmbeach.k12.fl.us/pao/2014/02/20/school-district-take-our-daughters-and-sons-to-work-day-thursday-march-6-2014/>
 on*
 *Thursday, March 6, 2014.*
 
*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to