John, try SELECTMULTI(ANY) and exclude LOGINDDNAME, and then post the results plse Christian
-----Ursprüngliche Nachricht----- Von: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] Im Auftrag von John Dawes Gesendet: Freitag, 17. Oktober 2014 19:17 An: IBM-MAIN@LISTSERV.UA.EDU Betreff: DFDSS QUESTION - LOOKING FOR EXAMPLE. G'Day, Would anybody have an example of an input volume list. I am trying to perform a logical backup of a volume however some of the dsns are multi-volume. The doc says the following : Specify SELECTMULTI(FIRST) and include the first volume of the data set in the input volume list. For VSAM data sets, you must include the first volume of the data component in the input volume list. Below is my jcl: //BACKUP EXEC PGM=ADRDSSU,REGION=4096K //INPUT1 DD UNIT=SYSALLDA,VOL=SER=SYS301,DISP=OLD //TAPE1 DD UNIT=3490,LABEL=(1,SL), // DSN=HESP.LOGICAL.BACKUP.SYS301.COPY1, // DISP=(,CATLG,DELETE),VOL=(,,,35) //TAPE2 DD UNIT=3490,LABEL=(1,SL), // DSN=HESP.LOGICAL.BACKUP.SYS301.COPY2, // DISP=(,CATLG,DELETE),VOL=(,,,35) //SYSPRINT DD SYSOUT=* //SYSUDUMP DD SYSOUT=* //SYSMAP DD SYSOUT=* //SYSIN DD * DUMP DATASET(INCLUDE(**) - EXCLUDE(SYS1.**)) - SELECTMULTI(FIRST) - SPHERE - LOGINDDNAME(INPUT1) - OUTDD(TAPE1,TAPE2) OPT(4) ALLDATA(*) ALLEXCP /* The first of the dsn is on volume SYS306 and the third extent is on SYS340. We have a corrupted VTOC INDEX. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN