//LUA EXEC PGM=LUA,PARM=HELLO
//STEPLIB DD DSN=XCICS.LUA4Z.LOADLIB,DISP=SHR
//*UA DD DSN=XCICS.LUA4Z.CONF,DISP=SHR
//LUA DD DSN=XCICS.LUA4Z.SAMPLIB,DISP=SHR
*********************
Hello, World!
****************
BROWSE XCICS.LUA4Z.SAMPLIB(LUACONF) - 01.00 Line 00000000 Col 001 080
Command ===> Scroll ===>
PAGE
********************************* Top of Data **********************************
LUA_HOME="/u/eileen/j15/lua"
******************************** Bottom of Data ********************************
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Barkow, Eileen
Sent: Thursday, October 23, 2014 1:25 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS, with batteries
I am waiting for the LUA4Z.LOADLIB to be added to linklist.
I do not have access to the ISPF command tables.
HOWEVER,
This job worked in batch.
I put the LUACONF member in LUA4Z.SAMPLIB and ran this:
//LUA EXEC PGM=LUA,PARM=IVP
//STEPLIB DD DSN=XCICS.LUA4Z.LOADLIB,DISP=SHR
//*UA DD DSN=XCICS.LUA4Z.CONF,DISP=SHR
//LUA DD DSN=XCICS.LUA4Z.SAMPLIB,DISP=SHR
***OUTPUT****************************** TOP OF DATA
**********************************
Lua4z installation verification procedure (IVP)
Checking LUA_PATH configuration: passed
Checking LUA_CPATH configuration: passed
Test results:
2 passed
0 failed
Success: all tests passed.
******************************** BOTTOM OF DATA ********************************
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of David Crayford
Sent: Thursday, October 23, 2014 12:10 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS, with batteries
On 23/10/2014 11:59 PM, Barkow, Eileen wrote:
I got passed the LUA DD but cannot read the SAMPLIB
FREE FI(LUA)
IKJ56247I FILE LUA NOT FREED, IS NOT ALLOCATED ALLOC FI(LUA)
DA('XCICS.LUA4Z.CONF') SHR CALL 'XCICS.LUA4Z.LOADLIB(LUA)'
'XCICS.LUA4Z.SAMPLIB(IVP)'
lua: cannot open //DD:LUA(xcics.lua4z.samplib(ivp)): EDC5047I An
invalid file name was specified as a function parameter.
(errno2=0xC00B028E) FREE FI(LUA)
***
A TSO call will not do the trick. You have to use the Lua launcher. The SAMPLIB
contains a ready to go ISPF command table to put into USRxCMDS or SITECMDS etc.
To invoke Lua try the following:
If you have installed the command table into your ISPTLIB then simply:
LUA IVP
otherwise, If you have allocated the LUA DD then:
TSO LUA IVP
if the LUA DD is not allocated you can specify the qualifieid data set:
TSO LUA "//'XCICS.LUA4Z.SAMPLIB(IVP)'"
FREE FI(LUA)
IKJ56247I FILE LUA NOT FREED, IS NOT ALLOCATED ALLOC FI(LUA)
DA('XCICS.LUA4Z.CONF') SHR CALL 'XCICS.LUA4Z.LOADLIB(LUA)'
"//'XCICS.LUA4Z.SAMPLIB(IVP)'"
IKJ56712I INVALID KEYWORD, "//'XCICS.LUA4Z.SAMPLIB(IVP)'"
***
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
On Behalf Of David Crayford
Sent: Thursday, October 23, 2014 11:50 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS, with
batteries
On 23/10/2014 11:35 PM, Barkow, Eileen wrote:
Ignore this - the DD should be LUACONF, not LUA
Nope! The DD should be LUA and the member name should be LUACONF.
-----Original Message-----
From: Barkow, Eileen
Sent: Thursday, October 23, 2014 11:33 AM
To: 'IBM Mainframe Discussion List'
Subject: RE: [ANN] Lua4z: the Lua programming language on z/OS, with
batteries
Thanks again for the info. I will try to do without linklist for now.
I tried to set up the LUACONF member as documented and get this error:
And the parm "//'SYS1.SAMPLIB(IVP)'" is not accepted by the system.
FREE FI(LUA)
IKJ56247I FILE LUA NOT FREED, IS NOT ALLOCATED
ALLOC FI(LUA) DA('XCICS.LUA4Z.CONF') SHR
CALL 'XCICS.LUA4Z.LOADLIB(LUA)' 'XCICS.LUA4Z.SAMPLIB(IVP)'
PANIC: unprotected error in call to Lua API (LUACONF: Error
running configurati on file: //DD:LUA(LUACONF):1: unexpected
symbol near '00010001')
FREE FI(LUA)
***
I tried no quotes and single quotes and get the same error above.
Also tred LUA_HOME = "..." with spaces as shown
BROWSE XCICS.LUA4Z.CONF(LUACONF) - 01.01
Command ===>
********************************* Top of Data *
LUA_HOME="/u/eileen/j15/lua"
******************************** Bottom of Data
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
On Behalf Of David Crayford
Sent: Thursday, October 23, 2014 10:36 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS, with
batteries
Unfortunately that's not possible. Lua4z is a C/C++ XPLINK application and it
requires a PO library so a PDSE is mandatory.
I understand your position but XPLINK is the build and it results in much
faster code. I know you probably already know this but you can always
dynamically add a PDSE to the linklist.
On 23/10/2014 10:25 PM, Barkow, Eileen wrote:
Here is another thing I never saw before.
I do not have a PDSE in linklist (that I can use) so I am trying to copy the
LUA4Z.LOADLIB modules into a regular pds and get this error.
I do not want to have another linklist lib added for this product and was
always able to copy PDSE load modules into PDS's.
Is there any way to copy the LUA4Z.LOADLIB modules into a regular PDS?
IEW2606S 4B39 MODULE INCORPORATES VERSION 3 PROGRAM OBJECT FEATURES AND CANNOT
BE SAVED IN LOAD MODULE FORMAT.
IEW2606S 4B39 MODULE INCORPORATES VERSION 3 PROGRAM OBJECT FEATURES AND
CANNOT
BE SAVED IN LOAD MODULE FORMAT.
IEW2606S 4B39 MODULE INCORPORATES VERSION 3 PROGRAM OBJECT FEATURES AND
CANNOT
BE SAVED IN LOAD MODULE FORMAT.
***
-----Original Message-----
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of David Crayford
Sent: Thursday, October 23, 2014 9:49 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS, with
batteries
On 23/10/2014 9:36 PM, Barkow, Eileen wrote:
You need to enter the y in lower case - otherwise those dataset errors occur.
I have now changed the installation script to fold all input to upper case.
I am not up to snuff on UNIX lately and do not understand what the ? in the
environment variables mean.
They did work when I added them to my profile, but I never saw this syntax
before:
export LUA_PATH="./?.lua;\
$LUA_HOME/share/lua/5.1/?.lua;\
$LUA_HOME/share/lua/5.1/?/init.lua;\
$LUA_HOME/lib/lua/5.1/?.lua;\
$LUA_HOME/lib/lua/5.1/?/init.lua;\
//DD:LUA(?)"
The ? is a placeholder for the module name. So if you do the
following
local m = require "test" it will replace "?" with "test" in the search path.
The //DD:LUA(?) will resolve to //DD:LUA(TEST) so if you are running in TSO or batch it will load the module
for a PDS(E) allocated to a DDname of LUA.
If you are running native then my suggestion is to set LUA_HOME in the LUACONF
member to make your life easier http://lua4z.com/doc/manual/install.md.html.
-----Original Message-----
From: IBM Mainframe Discussion List
[mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of David Crayford
Sent: Thursday, October 23, 2014 9:24 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: [ANN] Lua4z: the Lua programming language on z/OS,
with batteries
On 23/10/2014 8:42 PM, John McKown wrote:
Well, I got it installed. I ran into a "problem" with the
./lua4z-1.0.0.bin when I ran it a second time. The first time, it
said it couldn't find the PDSEs (LOADLIB and SAMPLIB) and did I
want to define them? All is good. I reply "Y" and they are allocated.
When I ran the script a second time, it did the same. It did _not_
properly detect that the PDSEs existed. It tried to allocate them
again, and I got error messages from that allocation. The script continued to
run.
All in all, I got what I needed, but it seems to point out a
problem with the installation script. Oh, I entered the data set
names in lower case, which might be the problem.
Many thanks for testing this John. Good catch!
The lua4z/examples/ivp.lua fails when I run it from my UNIX shell.
====
LIH1:TSH009:/HM/lua4z/examples$
lua ivp.lua
Lua4z installation verification procedure (IVP)
Checking LUA_PATH configuration: passed Checking LUA_CPATH
configuration: failed
Test results:
1 passed
1 failed
LIH1:TSH009:/HM/lua4z/examples$
printenv | grep LUA_
LUA_PATH=/HM/lua4z/share/lua/5.1/?.lua;./?.lua;/HM/lua4z/share/lua/5.
1 /?/init.lua;/HM/lua4z/lua/5.1/?.lua;/HM/lua4z/install/?.lua
LUA_CPATH=./?.so;/HM/lua4z/lib/lua/5.1/?.so
LIH1:TSH009:/HM/lua4z/examples$
====
I looked at the ivp.lua. It references a variable "modules" which
contains "cjson" and "socket". There exists an cjson.so in the
LUA_CPATH. But "socket" is a directory in /HM/lua4z/lib/lua/5.1, not an ".so"
file.
Granted, I need to read up on lua, but given the results, this
seems like it may be a problem in the ivp.lua script.
Minor nits, but thought I'd give you a heads up.
Can I convince you to try it again. I've uploaded an updated IVP.
-------------------------------------------------------------------
-
-
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
-------------------------------------------------------------------
-
-
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
--------------------------------------------------------------------
-
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
--------------------------------------------------------------------
-
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
---------------------------------------------------------------------
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
---------------------------------------------------------------------
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN