On 4/16/2015 5:18 PM, Staller, Allan wrote:
This is a TFS (TEMP FILE SYSTEM) and is backed by virtual storage. You need approx..
600 MB of "space".
I would recommend allocating a PFS (Physical File System) large enough to hold
the 600 MB and mounting that PFS at /TMP.
Once done, the PFS can be handled by use of AGGGROW and AGGRINFO. See the
Distributed File Services manual SC23-6887-00 (for z/OS 2.1).
An IPL should not be necessary for the above.
BTW, when you go to expand the SERVERPAC files, you will need approx. 3 times
the space needed for download.
HTH,
<snip>
I am trying to down load datasets from serverpac. I am getting this message :
6831167 kbytes are required.
Please obtain more space before attempting restore.
My /tmp file is as follows:
/SYSTEM/tmp
,
Status . . . . . . . . :,Available
File system type . . . :,TFS
Mount mode . . . . . . :,R/W
Device number . . . . :,2
Type number . . . . . :,1
DD name . . . . . . . :,
Block size . . . . . . :,4096
Total blocks . . . . . :,1792000
Available blocks . . . :,1543002
Blocks in use . . . . :,248998
</snip>
I read the space required as 6.9GB, so you'll need a mod-9 to hold your
file. I recommend creating an /SMPNTS mount point, mounting your
filesystem there, then downloading the ServerPac. As Allan pointed out,
you will likely need at least 3 more mod-9s to unspin those tarballs.
Regards,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
