I hear you I'll put an eye catcher and do a sanity check Thanks
Sent from my iPhone > On Jun 15, 2015, at 5:11 AM, Rob Scott <rsc...@rocketsoftware.com> wrote: > > One thing to bear in mind is that you cannot guarantee that the R13 at the > time of error is the same as the R13 that you establish in your SRB. > > If you use this technique, I would recommend some verification steps in your > FRR code before you use the R13 from the SDWA. > > Rob Scott > Principal Software Engineer > Rocket Software > 77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA > Tel: +1.781.684.2305 > Email: rsc...@rs.com > Web: www.rocketsoftware.com > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of michelbutz > Sent: 14 June 2015 19:49 > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IEAMSCHD no FRR param > > No that big of a deal > > I'll just prime R13 from the SDWA with the value that the SRB had for 13 > Which had my working storage > > Sent from my iPhone > >> On Jun 14, 2015, at 2:41 PM, Lizette Koehler <stars...@mindspring.com> wrote: >> >> So I guess my question, what is the issue? >> >> It has the FRRADDR to pass an address of the FRR to get control. What >> parms do you need to pass to the FRR? >> >> Specifies the name (RS-type), or address in register (2)-(12), of an >> optional 4 byte input that contains the address of the Functional >> Recovery Routine (FRR) that is to be established prior to the SRB >> routine receiving control. The low bit of this address should not be >> set on. If it is set on, that bit will not be treated as part of the >> FRR address, but will be treated as indicating SDWALOC31=YES and will >> override the specification, or default, of SDWALOC31=NO. >> >> The FRR receives control in supervisor state, PSW key 0, primary ASC >> mode, 31-bit addressing mode, holding the same locks the SRB routine >> held at the time of error. The FRR receives control with the same >> PASID, SASID, and HASID as the SRB routine had on entry. >> >> If you specify LLOCK=YES, then the FRR should release the LOCAL lock >> prior to the completion of its processing. >> >> >> Lizette >> >> >>> -----Original Message----- >>> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] >>> On Behalf Of michelbutz >>> Sent: Sunday, June 14, 2015 11:30 AM >>> To: IBM-MAIN@LISTSERV.UA.EDU >>> Subject: IEAMSCHD no FRR param >>> >>> The IEAMSCHD has a FRRADDR parm >>> But doesn't have an input param for paramters to FRR routine >>> >>> Sent from my iPhone >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ================================ > Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ > +1 800.966.3270 ■ +1 781.577.4321 > Unsubscribe From Commercial Email – unsubscr...@rocketsoftware.com > Manage Your Subscription Preferences - > http://info.rocketsoftware.com/GlobalSubscriptionManagementEmailFooter_SubscriptionCenter.html > Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy > ================================ > > This communication and any attachments may contain confidential information > of Rocket Software, Inc. All unauthorized use, disclosure or distribution is > prohibited. If you are not the intended recipient, please notify Rocket > Software immediately and destroy all copies of this communication. Thank you. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN