So it depends on the Hardware vendor. I have EMC, so I have the ability to run an STC and send commands to the DLm to see what is on what tape drives.
I would think other hardware vendors might have a similar interface. Or could operations have a dedicated console logged on to the controller of the tape drive and see it that way? Or do you have a software tool like CA-Vantage that can do that easily? Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Toni Cecil > Sent: Tuesday, June 21, 2016 2:05 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Quick way to show what jobs are using tape > > typo, correct is D GRS,RES=(SYSZVOLS,*), sorry > > 2016-06-21 22:04 GMT+01:00 Toni Cecil <acbi...@gmail.com>: > > > Hello, > > is there a quick way to the operation team know what jobs that are > > currently active are using tape and what tape volumes ?? > > > > It seems like a newbie question, but when you have several ranges of > > tape libraries addresses and hundreads of jobs running on several > > lpars, it's not easy... > > > > Besides, D U,TAPE,ALLOC,,xxx, I'm thinking of D GRS,RES=(SYSZOLS.*). > > Any ideas are welcome ?? > > > > I'm running z/OS 1.13 and 2.1. > > > > Many thx, Antonio Cecilio. > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
