They obviously survived the initial long outage. Shut it down, the HMC clock correctly with UTC. Make sure the SE has updated it's clock from the HMC. POR IPL with a modern CLOCKxx
:) > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of George Kozakos > Sent: Tuesday, November 08, 2016 2:09 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Time Change Problem #1398 > > You should open a PMR. UTC/GMT can only be changed via an IPL with > OPERATOR PROMPT specified in CLOCKxx. At POR the processor TOD is set > to the SE clock. > > George Kozakos > z/OS Software Service, Level 2 Supervisor > > IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> wrote on > 08/11/2016 02:38:16 PM: > > > From: Christopher Brown <cbr...@cswg.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Date: 08/11/2016 02:38 PM > > Subject: Re: Time Change Problem #1398 Sent by: IBM Mainframe > > Discussion List <IBM-MAIN@LISTSERV.UA.EDU> > > > > To all who replied, > > > > Site does not have STP or wouldn't be in this spot. Their timezone is > > W.06 and UTC time is local plus 1 hour. I will try and get a copy of > > the CLOCKxx member. > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
