A recent SHARE NJE presentation from the 2013 SHARE in San Francisco
https://www.google.com/url?url=https://share.confex.com/share/120/webprogram/Handout/Session13028/What%2520are%2520all%2520these%2520JES2%2520NJE%2520Options.pdf&rct=j&frm=1&q=&esrc=s&sa=U&ved=0ahUKEwja4uCh4pzTAhXrzFQKHe4UBYY4ChAWCDQwBw&usg=AFQjCNG8Osmtrmmd3T6dxrIg_iSdiWBtdQ
Tony
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Lizette Koehler
Sent: Tuesday, April 11, 2017 9:35 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: NJE between two different NETIDs
There are Share presentations as well as the JES2 Init and Tuning GUIDE and
REFERENCE manuals.
Lizette
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of william janulin
> Sent: Tuesday, April 11, 2017 6:29 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: NJE between two different NETIDs
>
> Which manual has the instructions for setting up NJE in JES2? Looks
> like I will be going through a similar exercise at some point in the near
> future?
> Bill J.
>
>
>
>
> On Tuesday, April 11, 2017 9:03 AM, "Cieri, Anthony"
> <aci...@seic.com>
> wrote:
>
>
>
> It is possible to add all three definitions (APPL, DESTID and
> CONNECT) dynamically via the $ADD JES2 command.
>
> You will also need to define the remote site as a NODE to JES2. If you
> have a node definition available, you can use the $T command to change
> the NODE parameters to your desired values. Then the connection will
> be between this remote node and your local node (OWNNODE).
>
> You can also look at the NODE parameters called PRIVATE, PATHMGR and ENDNODE.
> Depending upon how you set these, you might NOT even need a connect statement.
> The PATHMGR parameter needs to be consistent between the two nodes.
> I.E. both set to PATHMGR=NO or both set to PATHMGR=YES.
>
> HTH
> Tony
>
> ________________________________________
> From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on
> behalf of Gilson Cesar de Oliveira [gil...@gmail.com]
> Sent: Tuesday, April 11, 2017 7:59 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: NJE between two different NETIDs
>
> Dear list:
>
> We are planning to establish a NJE connection between two different
> NETIDs sites in SNA and reviewing the steps we faced in one point
> related to the definition of the NODE.
>
> My initial understanding is that we have to configure (to add) in my
> JES2 configuration the following statements:
>
> APPL => it is possible to add APPL dynamically through the $ADD APPL command.
> DESTID => it is possible to add DESTID dynamically through the $ADD
> DESTid command.
> CONNECT => it is also possible to add CONNECT dynamically through the
> $ADD CONNECT command.
>
> The APPL is also defined in VTAM as CDRSC and this definition is made
> dynamically with no restart of any service in z/OS.
>
> In order to add a CONNECT, one of the statements needed is NODE (NODEB).
> It is supposed to be defined previously but I could not find any way
> to define it dynamically.
>
> Does anyone here have another way to establish this connection without
> to restart JES2 to add a new NODE ??
>
> Thanks in advance for any help.
>
> Regards,
>
> Gilson Cesar
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
