So this has been available for some time https://www-304.ibm.com/support/docview.wss?uid=isg1OA34634
Before enabling non-VSAM access methods, BSAM, BPAM, and QSAM, for support of dynamic allocation options XTIOT, nocapture UCB, and DSAB above the line (z/OS 1.12 DFSMSdfp LI957), please review the publication "z/OS V1R12.0 DFSMS Using the New Functions", and determine the necessary steps to take before enabling this support system wide via setting the NON_VSAM_XTIOT=YES in the DEVSUPxx member of PARMLIB. Additionally, APAR OA34634 was created as a documentation APAR to update some points in "z/OS V1R12.0 DFSMS Using the New Functions." My understanding is when it is turned on, it makes things happen. I do not see that you can "test" it other than to verify that the XTIOT is being used for Non Vsam. You could probably do that through TSO TEST, XDC, or other tools that could look at active storage for the TIOT Even IPCS may be able to see if your TIOTs are XTIOT If you have IMS/CICS/DB2 you may want to search the internet for IBM XTIOT and see if there were any issues found for these products and XTIOT. If there were, you may want to see if you have the maintenance applied before turning it on. (I think you probably do, but never hurts to check the old stuff) Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Steely.Mark > Sent: Friday, August 04, 2017 8:39 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: XTIOT info > > We are z/OS v2.2 and I would like to add NON_VSAM_XTIOT=YES to DEVSUP. I have > already done this on our sandbox system without any problems. > > I would like to be able to test this out. Does anyone have a program or > anything else that will allocated a dataset using XTIOT. > > Any help would be appreciated. > > Thanks > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
