Judith/Jerry,
BMC's product (Subsystem Optimizer for zEnterprise "Subzero")
requires a BASIC or PARALLEL Sysplex environment.
Roger
On Tue, 19 Sep 2017 23:30:13 +0000, Edgington, Jerry
<jerry.edging...@kroger.com> wrote:
>Yes, Judith. That is correct. I missed that in your email. However, I believe
>the BMC tool allows you to connect CICS and maybe batch on one LPAR to DB2 on
>another LPAR.
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nelson, Judith
>Sent: Tuesday, September 19, 2017 5:43 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Hi Jerry,
>I have looked into the link to the remote database. As far as I understand
>this is that requires a db2 instance on both LPAR's. :(
>
>Thank you,
>
>Judith Nelson
>
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nelson, Judith
>Sent: Tuesday, September 19, 2017 12:00 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Thank you Jerry!
>
>Judith Nelson
>
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Edgington, Jerry
>Sent: Tuesday, September 19, 2017 11:25 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Sorry Judith,
>
>Our email system modifies the URL.
>
>I think this link should help with the setup of remote database from DB2 on
>z/OS.
>www.ibm.com/support/knowledgecenter/en/SSEPEK_11.0.0/dshare/src/tpc/db2z_sysibmlocationsds.html,
>
>Here is the BMC tool
>www.bmc.com/it-solutions/subsystem-optimizer.html
>
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Edgington, Jerry
>Sent: Tuesday, September 19, 2017 12:23 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Judith,
>
>I think this link should help with the setup of remote database from DB2 on
>z/OS.
>https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ibm.com_support_knowledgecenter_en_SSEPEK-5F11.0.0_dshare_src_tpc_db2z-5Fsysibmlocationsds.html&d=DwIFAg&c=WUZzGzAb7_N4DvMsVhUlFrsw4WYzLoMP5bgx2U7ydPE&r=gEY-_N3_t4QXFrS5e-OgAibMMWGnLPFFfmDVHG_3lz4&m=Q2qvjC85EobRWAgHVl-yX2v319f6i9cuTloWg-wjmsE&s=sJBowoFLA-8ocnbEpqCKvSdFmT2s355DrFGS5qkZq7M&e=
>
>Here is the BMC tool
>https://urldefense.proofpoint.com/v2/url?u=http-3A__www.bmc.com_it-2Dsolutions_subsystem-2Doptimizer.html&d=DwIFAg&c=WUZzGzAb7_N4DvMsVhUlFrsw4WYzLoMP5bgx2U7ydPE&r=gEY-_N3_t4QXFrS5e-OgAibMMWGnLPFFfmDVHG_3lz4&m=Q2qvjC85EobRWAgHVl-yX2v319f6i9cuTloWg-wjmsE&s=8dcWbFRJZ5UFFIwGKMcoOv5gW9_-1ldLc-jEYbQmIgw&e=
>
>Jerry
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nelson, Judith
>Sent: Tuesday, September 19, 2017 11:53 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Hi Jerry,
>You are correct with your assumption. :)
>
>If I set up the database as remote, wouldn't I still need some kind of a
>client to connect to it?
>Could you let me know which product from BMC would do this?
>
>Thank you,
>
>Judith Nelson
>
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Edgington, Jerry
>Sent: Tuesday, September 19, 2017 9:17 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: LPAR to LPAR access
>
>Judith,
>
>I know of a couple of ways to get batch and CICS to access a remote DB2, which
>is what you are asking, I believe, because you don't want to setup a DB2 data
>sharing.
>
>1) Within DB2, you can setup a database as a remote. DB2 admin should know how
>to do this.
>2) BMC has a product that would allow CICS/Batch to connect to a remote DB2,
>like it is locally attached
>
>
>Jerry
>
>-----Original Message-----
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nelson, Judith
>Sent: Tuesday, September 19, 2017 10:14 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: LPAR to LPAR access
>
>Hi,
>I am trying to find the best solution for the following problem.
>
>We have two LPARs, one of them has DB2 running, the other one hasn't. We do
>not have a SYSPLEX.
>We now want to access DB2 data in batch and through CICS, from the LPAR that
>doesn't have DB2 on it.
>
>For the batch side, I looked at ODBC, but I couldn't find anything how to set
>this up from another z/OS.
>
>I have set up a simple IPIC connection to connect CICS - CICS across LPAR's.
>The CICS's are talking. :)
>
>Does anyone have any ideas that could help me?
>
>Judith Nelson | Senior Systems Programmer
>Sammons(r) Financial Group Member Companies One Sammons Plaza | Sioux Falls,
>SD 57193
>Phone: (605) 373-2321
>jnel...@sfgmembers.com<mailto:jnel...@sfgmembers.com>
>
>
>The information contained in this message is confidential, protected from
>disclosure and may be legally privileged. If the reader of this message is
>not the intended recipient or an employee or agent responsible for delivering
>this message to the intended recipient, you are hereby notified that any
>disclosure, distribution, copying, or any action taken or action omitted in
>reliance on it, is strictly prohibited and may be unlawful. If you have
>received this communication in error, please notify us immediately by replying
>to this message and destroy the material in its entirety, whether in
>electronic or hard copy format. Thank you.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>________________________________
>
>This e-mail message, including any attachments, is for the sole use of the
>intended recipient(s) and may contain information that is confidential and
>protected by law from unauthorized disclosure. Any unauthorized review, use,
>disclosure or distribution is prohibited. If you are not the intended
>recipient, please contact the sender by reply e-mail and destroy all copies of
>the original message.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
>The information contained in this message is confidential, protected from
>disclosure and may be legally privileged. If the reader of this message is
>not the intended recipient or an employee or agent responsible for delivering
>this message to the intended recipient, you are hereby notified that any
>disclosure, distribution, copying, or any action taken or action omitted in
>reliance on it, is strictly prohibited and may be unlawful. If you have
>received this communication in error, please notify us immediately by replying
>to this message and destroy the material in its entirety, whether in
>electronic or hard copy format. Thank you.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>________________________________
>
>This e-mail message, including any attachments, is for the sole use of the
>intended recipient(s) and may contain information that is confidential and
>protected by law from unauthorized disclosure. Any unauthorized review, use,
>disclosure or distribution is prohibited. If you are not the intended
>recipient, please contact the sender by reply e-mail and destroy all copies of
>the original message.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>________________________________
>
>This e-mail message, including any attachments, is for the sole use of the
>intended recipient(s) and may contain information that is confidential and
>protected by law from unauthorized disclosure. Any unauthorized review, use,
>disclosure or distribution is prohibited. If you are not the intended
>recipient, please contact the sender by reply e-mail and destroy all copies of
>the original message.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
>The information contained in this message is confidential, protected from
>disclosure and may be legally privileged. If the reader of this message is
>not the intended recipient or an employee or agent responsible for delivering
>this message to the intended recipient, you are hereby notified that any
>disclosure, distribution, copying, or any action taken or action omitted in
>reliance on it, is strictly prohibited and may be unlawful. If you have
>received this communication in error, please notify us immediately by replying
>to this message and destroy the material in its entirety, whether in
>electronic or hard copy format. Thank you.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
>The information contained in this message is confidential, protected from
>disclosure and may be legally privileged. If the reader of this message is
>not the intended recipient or an employee or agent responsible for delivering
>this message to the intended recipient, you are hereby notified that any
>disclosure, distribution, copying, or any action taken or action omitted in
>reliance on it, is strictly prohibited and may be unlawful. If you have
>received this communication in error, please notify us immediately by replying
>to this message and destroy the material in its entirety, whether in
>electronic or hard copy format. Thank you.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>________________________________
>
>This e-mail message, including any attachments, is for the sole use of the
>intended recipient(s) and may contain information that is confidential and
>protected by law from unauthorized disclosure. Any unauthorized review, use,
>disclosure or distribution is prohibited. If you are not the intended
>recipient, please contact the sender by reply e-mail and destroy all copies of
>the original message.
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions,
>send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
