It's clear to me that I am missing the "allow signon" piece. The connections
are being made, but some handhake is failing.
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.1
Port: 175 Successful
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.2
Port: 175 Initiated
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.2
Port: 175 Successful
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.2
Port:
1059 ended due to failure of NJETCP Signon to complete within
allotted time
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.1
Port:
175 ended due to failure of NJETCP Signon to complete within allotted
time
IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.2
Port:
175 ended due to failure of NJETCP Signon to complete within allotted
time
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]]
> On Behalf Of Gibney, Dave
> Sent: Wednesday, November 01, 2017 1:38 PM
> To: [email protected]
> Subject: Re: Moving from NJE over ESCON CTC to IP
>
> Using EJES,
> LINES -- DELENN Line Status
> ------------------------------------------------------------------
> ------------------------- Row 1 of
> Cmd Device Status Node Work-Selection Line-Limit Page-Limit JobName
> JobID Owner CurLines TotLines ApplID Unit
> sss ssssssss/ssssssss ssssssss ssssssssssssssss ssssssssss ssssssssss ssssssss
> ssssssss ssssssss ssssssss ssssssss ssssssss ssss
> LNE1 ACTIVE
> TCP
> LNE2 ACTIVE
> TCP
> LNE3 ACTIVE
> TCP
> LNE4 ACTIVE
> TCP
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]]
> > On Behalf Of Cieri, Anthony
> > Sent: Wednesday, November 01, 2017 1:15 PM
> > To: [email protected]
> > Subject: Re: Moving from NJE over ESCON CTC to IP
> >
> > Dave,
> >
> > My first thought would be to check for some "available" UNIT=TCP
> > Jes2 lines.
> >
> > Hth
> > Tony
> >
> >
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]]
> > On Behalf Of Gibney, Dave
> > Sent: Wednesday, November 01, 2017 3:51 PM
> > To: [email protected]
> > Subject: Moving from NJE over ESCON CTC to IP
> >
> > I think I've done an equivalent set of JESPARMS, but I get this
> > $HASP568 NODE=AISDEVL - AUTOMATIC CONNECT (SOCKET=AISDEVL)
> > IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.3
> > Port: 175 Initiated
> > IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 192.168.1.3
> > Port: 175 Successful
> > IAZ0543I NETSRV4 TCP/IP connection with IP Addr:
> > srcpos02.ad.wsu.edu
> > Port: 175 ended due to failure of NJETCP Signon to complete within
> > allotted time
> >
> > For all connection. The 192.168.1 network is over Hipersocket
> >
> > Undoubtably, I am missing something simple in the TFM
> >
> > Dave Gibney
> > Information Technology Services
> > Washington State University
> >
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email to
> [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
