yep, can't do a lot remotely :( and make sure you use the USB in the HMC not the Service console (HMC) on the CEC
Carmen ----- Original Message ----- From: "Crispin Hugo" <crispin.h...@macro4.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Thursday, November 2, 2017 12:52:26 PM Subject: Re: Z14 IOCP and USB My fault as I was trying to do it remotely. All appears ok now. Thanks Crispin Hugo Systems Specialist Macro 4 Limited d: +44 1293 872121 | m: +44 7753951308 | t: +44 1293 872000 | www.macro4.com Registered office: The Orangery, Turners Hill Road, Worth, Crawley, West Sussex, RH10 4SS Registered in England no: 00927588 Please consider the environment and only print this email if you really need to. This message (including any attachments) contains confidential information that is PRIVILEGED, CONFIDENTIAL and/or ATTORNEY WORK PRODUCT and is intended only for the individual(s) named herein. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this message in error, please notify the Macro 4 Postmaster (postmas...@macro4.com) of the error immediately, do not read or use the email and any attachments in any manner, destroy all copies, and delete it from your system if the communication was sent via email. Macro 4 Limited, Tel: +44 1293 872000 Fax: +44 1293 872001. -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jesse 1 Robinson Sent: 02 November 2017 17:15 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Z14 IOCP and USB I don't have a z14 to verify, but doing it with earlier Z boxes requires inserting the USB into the right slot on the right HMC. It cannot be done via remote login, only on a physical HMC connected to the CEC. When you insert the USB, a message will pop up on the HMC confirming that the USB is recognized. That's when the 'upload from USB' option becomes selectable. If you don't see that message, then the USB is not recognized. E.g. wrong slot or wrong HMC device. I think the IOCDS needs to be in the root directory on the USB. . . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-543-6132 Office ⇐=== NEW robin...@sce.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of R.S. Sent: Thursday, November 02, 2017 9:44 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: Z14 IOCP and USB W dniu 2017-11-02 o 17:36, Crispin Hugo pisze: > Trying to get IOCP onto new Z14 and it seems it only wants me to use FTP and > not USB. > I start on HMC, get over to SE single operations, select I/O configuration. > The USB option is greyed out. > After I did get one over via FTP(a real pain) after the build , the source > had disappeared. What am I doing wrong. It seems you do it properly, at least it worked for 13 and previous machines. Wild guesses: Maybe insert USB stick before you start the dialog? Or just after? Note, remove any other stick! Or go to the CPC and logon of SE directly? -- Radoslaw Skorupka Lodz, Poland ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- This e-mail message has been scanned and cleared by Google Message Security and the UNICOM Global security systems. This message is for the named person's use only. If you receive this message in error, please delete it and notify the sender. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
