No ROSCOE here - although I do miss it. I loved the editor and using RPF's.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Thursday, February 22, 2018 9:21 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command Do you run CA-Roscoe at your location? We had problems with it(since it reads spool directly) and they had to come up with some maint before we could complete the switch. _________________________________________________________________ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Burrell, Todd Sent: Thursday, February 22, 2018 8:25 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** So my summary of everyone's responses is that we need to do the $TSPOOLDEF command and then give it a couple/few minutes, and then do the $ACTIVATE command. And there were a couple of bad pickle jokes as well :-). Thanks -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Rugen, Len Sent: Wednesday, February 21, 2018 5:11 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command A cold start is a big dill... -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jesse 1 Robinson Sent: Wednesday, February 21, 2018 3:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command I've never been in a pickle, but I've had to do a cold start. Much colder than a pickle (or so I imagine). . . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-543-6132 Office ⇐=== NEW robin...@sce.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Wednesday, February 21, 2018 12:31 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: Any issues with $ACTIVATE,LEVEL=Z22 command just some food for thought, once you're z22 mode there's no EASY way back.... that's the biggest reason I've delayed this on my prod plex, I'm comfortable now but for any reason I had to revert back to z/OS 2.1, I'd be in a pickle :) Carmen Vitullo ----- Original Message ----- From: "Todd Burrell" <todd_burr...@csx.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:41:43 PM Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command Yeah - we're planning on doing both at the same time ($TSPOOLDEF and $ACTIVATE). -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Wednesday, February 21, 2018 1:39 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command forgot to mention CYL_MANAGED support can be changed dynamically $T SPOOLDEF,CYL_MANAGED=ALLOWED Carmen Vitullo ----- Original Message ----- From: "Carmen Vitullo" <cvitu...@hughes.net> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:34:58 PM Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command no problems on my test system after expanding my checkpoint but my production systems MAS I get $HASP895 z22 ACTIVATION WILL FAIL IF ISSUED FROM THIS MEMBER. $HASP895 THE FOLLOWING ISSUES PREVENT ACTIVATION: $HASP895 -- CYL_MANAGED SUPPORT MUST BE ACTIVATED. I'm in no rush right now to get to z22 mode Carmen Vitullo ----- Original Message ----- From: "Todd Burrell" <todd_burr...@csx.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:27:11 PM Subject: Any issues with $ACTIVATE,LEVEL=Z22 command We've done the $ACTIVATE,LEVEL=Z22 command on our test system and seen no issues, but I wanted to run it by this group to see if there have been any issues that anyone has seen when doing this? I've checked our CHECKPOINT's and they have plenty of room. We will also be doing the $TSPOOLDEF,CYL_MANAGED=ALLOWED command at the same time. Thanks Todd Burrell ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN This email transmission and any accompanying attachments may contain CSX privileged and confidential information intended only for the use of the intended addressee. Any dissemination, distribution, copying or action taken in reliance on the contents of this email by anyone other than the intended recipient is strictly prohibited. If you have received this email in error please immediately delete it and notify sender at the above CSX email address. Sender and CSX accept no liability for any damage caused directly or indirectly by receipt of this email. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
