If you are varying volumes offline, I assume they are being emptied, and your list above shows just catalogs. About 3 years ago, I needed to Reorg some of our catalogs, using http://www-01.ibm.com/support/docview.wss?uid=isg1II13354 .
First, I would run the IDCAMS LISTCAT ALL command. This will list all aliases and datasets in that catalog. For catalogs with nothing but aliases, you can just delete the Aliases in the master catalog, deallocate the catalog from the catalog address space, and delete the catalog, using some of the commands from the IBM Info APAR above. If there are datasets in the catalog, you need to follow *ALL* the procedures in the IBM Info APAR above to move the catalog to a different volume, which will require an outage for the datasets in the catalog.. Or if you don't want to take an outage to move the just the catalog then you can move the entire volume to a new UCB with TDMF, FDRPAS, Etc without an outage. Once the catalog is off the volume then you can vary the volume offline and re-init as spare. On Mon, Sep 17, 2018 at 2:08 PM George Rodriguez <0000016eebd7289b-dmarc-requ...@listserv.ua.edu> wrote: > > Boy, I'm way over my head here: > > F CATALOG,ALLOCATED(PCAT00) > IEC351I CATALOG ADDRESS SPACE MODIFY COMMAND ACTIVE > IEC348I ALLOCATED CATALOGS 976 > *CAS******************************************************************* > * FLAGS -VOLSER-USER-CATALOG NAME % * > * Y---R- PCAT00 0001 CATALOG.SCHOOL.USERCAT 1 * > * Y---R- PCAT00 0001 CATALOG.TAPEGDG.DB2.USERCAT 1 * > * Y---R- PCAT00 0001 CATALOG.TAPEGDG.PROD.USERCAT 1 * > * Y---R- PCAT00 0001 CATALOG.FINANCE.USERCAT 1 * > * Y---R- PCAT00 0001 CATALOG.BUDGET.USERCAT 1 * > * Y---R- PCAT00 0001 CATALOG.DFHSM.USERCAT 1 * > * Y-I-R- PCAT00 0001 CATALOG.SDPBC.USERCAT 1 * > *********************************************************************** > * Y/N-ALLOCATED TO CAS, S-SMS, V-VLF, I-ISC, C-CLOSED, D-DELETED, * > * R-SHARED, A-ATL, E-ECS SHARED, K-LOCKED * > *CAS******************************************************************* > IEC352I CATALOG ADDRESS SPACE MODIFY COMMAND COMPLETED > > and for the next one: > > F CATALOG,ALLOCATED(PCAT01) > IEC351I CATALOG ADDRESS SPACE MODIFY COMMAND ACTIVE > IEC348I ALLOCATED CATALOGS 981 > *CAS******************************************************************* > * FLAGS -VOLSER-USER-CATALOG NAME % * > * Y---R- PCAT01 0001 CATALOG.TEST.USERCAT 1 * > * Y---R- PCAT01 0001 CATALOG.TAPEGDG.TEST.USERCAT 1 * > * Y---R- PCAT01 0001 CATALOG.TESTNEW.USERCAT 1 * > * Y-I-R- PCAT01 0001 CATALOG.TSO.USERCAT 1 * > *********************************************************************** > * Y/N-ALLOCATED TO CAS, S-SMS, V-VLF, I-ISC, C-CLOSED, D-DELETED, * > * R-SHARED, A-ATL, E-ECS SHARED, K-LOCKED * > *CAS******************************************************************* > IEC352I CATALOG ADDRESS SPACE MODIFY COMMAND COMPLETED > > > > > *George Rodriguez* > > *Specialist II - IT Security* > *PX - 47652* > *(561) 357-7652 (office)* > *(954) 415-7586 (mobile)* > *School District of Palm Beach County* > *3348 Forest Hill Blvd.* > *Room B-332* > *West Palm Beach, FL. 33406-5869* > *Florida's Only A-Rated Urban District* > > > On Mon, Sep 17, 2018 at 1:51 PM Dana Mitchell <mitchd...@gmail.com> wrote: > > > For datasets allocated by your TSO session, if you issue 'ddlist' > > command, you can look for datasets that you currently have allocated that > > are on the volumes in question. Once found, you will have to discern if > > they are allocated in the actual logon proc, or logon clist or rexx, or > > dynamically and deal with them accordingly. > > > > For CATALOG, issue console command 'F CATALOG,ALLOCATED(vvvvvvv)' > > where vvvvvv= volser, to see what catalog(s) are on the volume that will > > need to be moved. > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > > > > > > > *Disclaimer: *Under Florida law, e-mail addresses are public records. > If you do not want your e-mail address released in response to a public > records request, do not send electronic mail to this entity. Instead, > contact this office by phone or in writing. > > > > > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
