Use SPXTAPE to back up the SDF data from the spool on Devl and restore
it to Test. This is documented in the Automated Installation and
Service manual. That should help the CMS problem.
If you can then get logged on you will need to change SYSTEM CONFIG to
tell it the new VOLIDs for your system areas.
Mary Elwood Digest wrote:
Good Morning All
A VM newbie here and I've done something that I don't know how to fix. I
built a z/VM 5.2 Test system off of our z/VM 5.2 Devl system by copying the
520RSD 520SPD and 520PGD to 520RST 520SPT and 520SPT. The first
time I IPL'd the 5.2 test system, I chose to do a 'clean noautolog'. The
system IPL's, but I have no Named Saved Segments. We thought these NSS's
were on the spool volume, so we restored the devl spool volume over to the
test and re'ipld. We have the same problem. When we try to logon to
'maint', it is missing the cmspipes and cmsvmlib. Is there a way I can
rebuild all the NSS without knowing what they are??? Now that I ask the
question - I'm thinking 'no', because I can't logon to CMS.
Any and all help greatly appreciated.
p.s. - it just might be easier to start from scratch.
Thanks for your help and patience,
Mary Elwood
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org
WAVV 2007 - Green Bay, WI - May 18-22, 2007