If you get the 1010, you might want to issue:  TERM CONMODE 3270

        -----Original Message-----
        From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of Schuh, Richard
        Sent: Monday, May 21, 2007 2:00 PM
        To: IBMVM@LISTSERV.UARK.EDU
        Subject: Re: system config file
        
        

        Link to the disk RR and ipl it with a loadparm of the console
address - IPL dev LOADP consaddr

         

        Regards, 
        Richard Schuh 

         

        
  _____  


        From: The IBM z/VM Operating System
[mailto:[EMAIL PROTECTED] On Behalf Of James M
        Sent: Monday, May 21, 2007 10:57 AM
        To: IBMVM@LISTSERV.UARK.EDU
        Subject: Re: system config file

         

        Thanks John.
        Is there a way to show the sapl screen while the system is
running?
        -James

        On 5/21/07, John Franciscovich < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> > wrote:

        Given that, it looks like you'll be ok. The way to verify that
this is 
        the disk that will be used the next time you IPL is to display
the
        stand-alone loader screen, and make sure that parm disk 3 is the
one
        being used (there are a couple of ways this could be shown,
either as
        EXTENT 3 or in the IPL parameters). 
        
        Also make sure that the system config file you changed is the
one being
        used. If the file you changed is named SYSTEM CONFIG, then make
sure
        there are no IPL parameters specifying a different name (with
parameters 
        FN= or FT=). If the file has a different name, make sure there
ARE
        parameters FN= and/or FT= specifying that name.
        
        John Franciscovich
        z/VM Development
        
        >q cpload indicates parm disk 3 (cf3) which is in fact the disk
holding the 
        >system config I modified with the new spool volume.
        >-James 
--------------------------------------------------------

This message w/attachments (message) may be privileged, confidential or 
proprietary, and if you are not an intended recipient, please notify the 
sender, do not use or share it and delete it. Unless specifically indicated, 
this message is not an offer to sell or a solicitation of any investment 
products or other financial product or service, an official confirmation of any 
transaction, or an official statement of Merrill Lynch. Subject to applicable 
law, Merrill Lynch may monitor, review and retain e-communications (EC) 
traveling through its networks/systems. The laws of the country of each 
sender/recipient may impact the handling of EC, and EC may be archived, 
supervised and produced in countries other than the country in which you are 
located. This message cannot be guaranteed to be secure or error-free. This 
message is subject to terms available at the following link: 
http://www.ml.com/e-communications_terms/. By messaging with Merrill Lynch you 
consent to the foregoing.
--------------------------------------------------------

Reply via email to