This manual might help you: http://publibfp.boulder.ibm.com/epubs/pdf/l26cts02.pdf
"How to use FC-attached SCSI devices with Linux on System z February, 2007 Linux Kernel 2.6" -------------------------------------------------------- This e-mail, including any attachments, may be confidential, privileged or otherwise legally protected. It is intended only for the addressee. If you received this e-mail in error or from someone who was not authorized to send it to you, do not disseminate, copy or otherwise use this e-mail or its attachments. Please notify the sender immediately by reply e-mail and delete the e-mail from your system. -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Hines, Bernard (MSFC-NNM04AA02C)[IBM BART] Sent: Wednesday, August 01, 2007 11:38 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: First attempt at FCP not going so well... Hey I am going to try and implement FCP channel. Does anybody have a cookbook with step-1, step-2, etc. and things to watch out for? I have/am going through the Red-Books and am trying to make a step by step map on a table top executrices before I hit a real system. -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Leland Sent: Monday, July 30, 2007 16:25 To: IBMVM@LISTSERV.UARK.EDU Subject: First attempt at FCP not going so well... We're attempting to define an FCP channel with 8 LUNs and we can see the WWPN of the Hitachi port, but nothing else. (Basically, I have know idea what I'm doing. :-)) When I run: scsidisk noprompt erase debug It seems to detect the remote port and the z port, but it's not very happy when it tries to do anything with them. Here's the output: INFO::START @ 30 Jul 2007 16:28:07 INFO::No of attached FCP Channels found=1 INFO::Choosen FCP Sub-Channel Device(s)=ALL DEVICES INFO::FCP SUB-CHANNEL 00000999 Initialized INFO::For Sub Channel 00000999 No of WWPNs found=2 INFO::For 00000999 Choosen WWPN(s)=ALL WWPNs INFO::FCP SUB-CHANNEL 00000999 Re-Initialized WARNING::WWPN 50060E8003AA070B Could Not be Opened DEBUG::ERROR RC:50060E8003AA070B THINOP()=-1559691091 WARNING::WWPN 50060E8003AA070B ignored DEBUG::ERROR RC:50060E8003AA070B GETLUN()=-112 WARNING::WWPN 50060E8003AA070B Could Not be Closed DEBUG::ERROR RC:50060E8003AA070B THINCP()=-13 INFO::FCP SUB-CHANNEL 00000999 Re-Initialized WARNING::WWPN 5005076401E240ED Could Not be Opened DEBUG::ERROR RC:5005076401E240ED THINOP()=-1477508179 WARNING::WWPN 5005076401E240ED ignored DEBUG::ERROR RC:5005076401E240ED GETLUN()=-112 WARNING::WWPN 5005076401E240ED Could Not be Closed DEBUG::ERROR RC:5005076401E240ED THINCP()=-13 INFO::FCP SUB-CHANNEL 00000999 RESET RC=0 INFO::END @ 30 Jul 2007 16:28:07 PROGRAM EXIT Any ideas? Any way to find out what those "error codes" mean? Thanks much, Leland