I got a similar reply (see below) when trying to apply "maintenance".
VMFP2P1965E The command, CP SEND BLDSEG EXEC VMFBLD PPF SEGBLD ESASEGS SEGBLIST HELPSEG.SEGMENT LINK (SERVICED NOLOG, failed with return code 36 VMFP2P2760I PUT2PROD processing completed unsuccessfully for SEGMENTS VMFP2P2760I PUT2PROD processing completed unsuccessfully Ready(00100); T=4.96/5.36 14:21:59 Had to expand "HELPSEG" size for my error. Not sure about your failing segment. [P.S. Hope I got that right, a lot of this is in the learning stage for me. -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Dave Jones Sent: Monday, January 05, 2009 10:38 To: IBMVM@LISTSERV.UARK.EDU Subject: z/VM 5.4 RSU 802 problem Hi, gang. I've downloaded the latest RSU 802 for z.VM 5.4; the SERVICE step runs without problem. After some testing, I did the PUT2PROD step, but I'm receiving the following errors during the segment processing step: ------------------------------------------------------------------------ ---- ST:VMFP2P2760I PUT2PROD processing started for segment DOSINST ST:AUTO LOGON *** BLDSEG USERS = 15 ST:BLDSEG : z/VM V5.4.0 2008-08-24 11:16 ST:BLDSEG : Ready; T=0.01/0.02 13:53:17 ST:BLDSEG : VMFBLD2760I VMFBLD processing started ST:BLDSEG : VMFBLD1851I Reading build lists ST:BLDSEG : VMFBLD2182I Identifying new build requirements ST:BLDSEG : VMFBLD2182I No new build requirements identified ST:BLDSEG : VMFBLD1851I (1 of 1) VMFBDSEG processing SEGBLIST EXC00000 ST:D, target is BUILD ST:BLDSEG : 51D (D) ST:BLDSEG : VMFBDS2115I Validating segment DOSINST ST:BLDSEG : VMFSET2204I Linking MAINT 3C4 as 3C4 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03C4 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3C4 3C4 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3C2 as 3C2 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03C2 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3C2 3C2 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3D2 as 3D2 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03D2 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3D2 3D2 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3A6 as 3A6 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03A6 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3A6 3A6 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3A4 as 3A4 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03A4 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3A4 3A4 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3A2 as 3A2 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03A2 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3A2 3A2 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 3B2 as 3B2 with the link mode MR ST:BLDSEG : HCPLNM107E MAINT 03B2 not linked; not in CP directory ST:BLDSEG : VMFSET1965E The command, CP LINK MAINT 3B2 3B2 MR, failed ST:with return code 107 ST:BLDSEG : VMFSET2204I Linking MAINT 490 as 490 with the link mode MR ST:BLDSEG : VMFSET2204I Linking MAINT 493 as 493 with the link mode MR ST:BLDSEG : HCPLNM102E DASD 0493 forced R/O; R/W by MAINT ST:BLDSEG : VMFBDS1965E The command, VMFSETUP, failed with return code ST:100 when issued with ST:BLDSEG : the argument(s): ZVM BLDDOS (LINK LOG NONE ST:NOCONS RETAIN A B D S Y ST:BLDSEG : VMFBLD1851E (1 of 1) VMFBDSEG completed with return code ST:100. Some objects were ST:BLDSEG : not built ST:BLDSEG : VMFBLD2180I There are 4 build requirements remaining ST:BLDSEG : VMFBLD2760I VMFBLD processing completed unsuccessfully ST:BLDSEG : Ready(00008); T=12.27/13.25 13:53:31 ST:BLDSEG : CONNECT= 00:00:15 VIRTCPU= 000:12.65 TOTCPU= 000:14.93 ST:BLDSEG : LOGOFF AT 13:53:31 CST SATURDAY 12/27/08 BY MAINT ST:USER DSC LOGOFF AS BLDSEG USERS = 14 FORCED BY MAINT ST:BLDSEG : RDR FILE 0012 SENT FROM BLDSEG CON WAS 0012 RECS 0041 CPY ST:001 T NOHOLD NOKEEP ST:DASD 019D LINKED R/W; R/O BY 12 USERS SV:VMFP2P1965E The command, CP SEND BLDSEG EXEC VMFBLD PPF SEGBLD ESASEGS SV: SEGBLIST DOSINST.SEGMENT LINK (SERVICED NOLOG, failed with SV: return code 8 ST:VMFP2P2760I PUT2PROD processing completed unsuccessfully for SEGMENTS ST:VMFP2P2760I PUT2PROD processing completed unsuccessfully ------------------------------------------------------------------ It appears that PUT2PROD is attempting to access minidisks that don't exist; they don't exist because I installed 5.4 using the SFS option, instead of the minidisk one, i.e., on the INSTPLAN exec, I selected option 'F' for all of the installable components. Anybody see what I'm doing wrong here? Thanks and have a good one. -- DJ V/Soft z/VM and mainframe Linux expertise, training, consulting, and software development www.vsoft-software.com