We changed our IOCP to add addresses to the FCP device. From: CNTLUNIT CUNUMBR=0000,PATH=((CSS(0),08)),UNIT=FCP
IODEVICE ADDRESS=(0000,1),CUNUMBR=(0000),UNIT=FCP <--- To CNTLUNIT CUNUMBR=0000,PATH=((CSS(0),08)),UNIT=FCP IODEVICE ADDRESS=(0000,4),CUNUMBR=(0000),UNIT=FCP <--- We are having trouble seeing the new addresses. We have taken the device offline (0), taken the chpid offline (8) but we had to force it off because the message said they were logically online vary offline chpid 8 HCPZCP6818E Vary command failed. Channel path 0008 is logically online vary offline chpid 8 force Channel path 0008 was successfully varied offline We varied the chpid back online vary online chpid 8 Channel path 0008 was successfully varied online but only one address shows up q 0-4 FCP 0000 FREE q chpid 8 Path 08 online to devices 0000 The IODF change appears to be OK. IOS502I I/O CONFIGURATION CHANGED 288 00000290 INVOKER = *MASTER* 00000290 NEW IODF = SYS9.IODF15 00000290 EDT REBUILT, NEW EDT ID = T1 00000290 NOTE = 0100,SOFTWARE-ONLY CHANGE 00000290 COMPID=SC1C3 00000290 NOTE = 010B,H/W AND S/W CONFIGURATION DEFINITIONS ARE NOW OUT OF SYNC 00000290 COMPID=SC1C3 00000290 DEVICE(S) DELETED FROM CSS 0 00000290 0000. 00000290 DEVICE(S) ADDED TO CSS 0 00000290 0000-0004. We are assuming this change can be dynamic. Any suggestions. Thanks Bobby Bauer Center for Information Technology National Institutes of Health Bethesda, MD 20892-5628 301-594-7474