If not already done, I'd recommend to switch the HMC away from the "classic" look and use the "Tree" interface. It is much more user-friendly. That's what I found out the last few weeks.
2009/8/19 Mike At HammockTree <m...@hammocktree.us> > It's on the "Load" screen/panel; the same one as you initialte the IPL > sequence from. > Load is under the "Recovery" group of tasks. > > Mike > ----- Original Message ----- From: "Suleiman Shahin" < > s_s_sha...@hotmail.com> > To: <IBMVM@LISTSERV.UARK.EDU> > Sent: Wednesday, August 19, 2009 4:56 PM > Subject: Which HMC Task allows specifying Load address > > > > Greetings folks! > > I am going through the manual trying to find the HMC task that requires you > or allows you to enter a different load address from the current. > > The hardware is 2096. > > It's been a while! > > Thanks. > > Suleiman Shahin > > > > > > > > _________________________________________________________________ > Windows Live: Keep your friends up to date with what you do online. > > http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_online:082009 > -- Kris Buelens, IBM Belgium, VM customer support