It may be that you have everything correct and you just left out the LPAR Access List information. All Modern Mainframes are in LPAR mode, so this may be required.
Larry Davis -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rich Smrcina Sent: Wednesday, August 18, 2010 8:18 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Defining OSA dynamically Does note 11 say anything about supporting specific OSA cards? On 08/18/2010 07:10 AM, Frank M. Ramaekers wrote: > > From the manual: > > *PQ_ON * > > *PQ_OFF * > > tells CP whether or not outbound priority queuing as supported by > the QDIO > > interface is to be used. If PQ_OFF is specified, then priority > queuing is > disabled. > > By not exploiting this function for an OSD channel, the channel > can > support four > > (4) times as many queues. For details, refer to Usage Note 11. > When the > option > > is unspecified, the default is PQ_ON, which enables priority queuing. > > Frank M. Ramaekers Jr. > > > > ---------------------------------------------------------------------------------------- > -- Rich Smrcina Phone: 414-491-6001 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2011 - April 15-19, 2011 Colorado Springs, CO