You're going to have to put the RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES On 2nd level def for the interface just like you did for the first I think.
Marcy From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of George Henke/NYLIC Sent: Tuesday, October 12, 2010 4:35 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Cannot TELNET to Level 2 It's all virtual, Level 2. So I guest I just put a SPECIAL in the directory entry for the Level 2 machine. In the meantime I have noticed that MPROUTE is coming up with OSPF protocol and all I have is RIP INTERFACE statements. Do you know how I specify RIP instead of OSPF protocol when MPROUTE comes up? MPROUTE does not stay up and that is another problem. Dave Jones <d...@vsoft-software.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 10/12/2010 07:19 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Cannot TELNET to Level 2 Yes, that's the problem, George. Here's what the error code E080 means: E080 A LAN connection could not be made, possibly for one of the following reasons: * The cable might not be present. * The LAN might not be functioning. * The port might have been disabled. Which one of these might apply to your situation....? DJ On 10/12/2010 04:47 PM, George Henke/NYLIC wrote: > Also getting the following error on TCPIP startup. > > Perhaps it is the problem. > > E080 says the OSA has no connectionto the LAN. > > > 17:43:34 DTCQDI001I QDIO device OSA9012 device number 9012: > 17:43:34 DTCQDI007I Enabled for QDIO data transfers > 17:43:34 DTCOSD223E OSD device OSA9012: Return code E080 from STRTLAN for > IPv4 > 17:43:34 DTCOSD305I Waiting for adapter-initiated Start Lan > > > ----- Forwarded by George Henke/NYLIC on 10/12/2010 05:44 PM ----- > > George Henke/NYLIC > 10/12/2010 05:17 PM > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Cannot TELNET to Level 2 > > > > > > Level 2 OSA cannot find a Gateway router: > > NETSTAT GATE > VM TCP/IP Netstat Level 540 TCP/IP Server Name: TCPIP > > Path MTU Discovery Aging Interval: 10 Minutes > > Known IPv4 gateways: None > > Known IPv6 gateways: None > > Ready; T=0.01/0.01 16:35:44 > > Level 1 has no problem finding the Gateway router: > > VM TCP/IP Netstat Level 540 TCP/IP Server Name: TCPIP > > Path MTU Discovery Aging Interval: 10 Minutes > > Known IPv4 gateways: > > Subnet Address Subnet Mask FirstHop Flgs PktSz Metric Link > -------------- ----------- -------- ---- ----- ------ ------ > > Default <none> 172.28.3.129 UG 1492 7 OSA9000LNK > 172.28.3.128 255.255.255.192 <direct> U 1492 1 OSA9000LNK > 172.28.3.192 255.255.255.192 <direct> U 1492 1 OSA9100LNK > > Known IPv6 gateways: None > > Ready; T=0.01/0.01 16:39:25 > > > Except for the home and OSA IP addresses the PROFILE TCPIP is exactly the > same. > > Except for HOSTNAME TCPIP DATA is the same. > > There is no default GATEWAY defined in PROFILE TCPIP for L1 or L2. > > In Level 2, I attach the OSA addresses in the TCPIP PROFILE EXEC: > > ATT 9012 TCPIP 9012 > ATT 9013 TCPIP 9013 > ATT 9014 TCPIP 9014 > > And they come up fine: > > q osa > 17:06:17 OSA 9012 ATTACHED TO TCPIP 9012 DEVTYPE OSA CHPID D2 > OSD > 17:06:17 OSA 9013 ATTACHED TO TCPIP 9013 DEVTYPE OSA CHPID D2 > OSD > 17:06:17 OSA 9014 ATTACHED TO TCPIP 9014 DEVTYPE OSA CHPID D2 > OSD > Ready; T=0.01/0.01 17:06:17 > > But I cannot TELNET to the Level 2 home address: 10.13.13.26. > > TRACERTE indicates it find the gateway router. > > MPROUTE is the same for both except for the IP addresses. > > How do I advertise TCPIP L2 to the Gateway, RIP routers, or point it to a > Gateway Router? > > Sorry for all this data, but here are the relevant details of my config > for Level 1 and Level 2: > > > Level 1 Parms: > > 10.13.13.18/30 VIRLNK1 > 172.28.3.131 OSA9000LNK > 172.28.3.195 OSA9100LNK > 172.28.3.31 OSA9210LNK > 10.13.13.162 OSA9108LNK > > DEVICE VIRDEV1 VIRTUAL 0 > LINK VIRLNK1 VIRTUAL 0 VIRDEV1 > DEVICE VIRDEV2 VIRTUAL 0 > LINK VIRLNK2 VIRTUAL 0 VIRDEV2 > DEVICE OSA9000 OSD 9000 PORTNAME OSA9000 NONROUTER AUTORESTART > LINK OSA9000LNK QDIOETHERNET OSA9000 > DEVICE OSA9100 OSD 9100 PORTNAME OSA2 NONROUTER AUTORESTART > LINK OSA9100LNK QDIOETHERNET OSA9100 > DEVICE OSA9108 OSD 9108 PORTNAME OSALAN NONROUTER AUTORESTART > LINK OSA9108LNK QDIOETHERNET OSA9108 MTU 1492 > DEVICE OSA9210 OSD 9210 PORTNAME OSA9020 PRIROUTER AUTORESTART > LINK OSA9210LNK QDIOETHERNET OSA9210 > DEVICE OSA9313 OSD 9313 PORTNAME OSA9060 PRIROUTER AUTORESTART > LINK OSA9313LNK QDIOETHERNET OSA9313 > > INTERFACE NAME=VIRLNK1 > IP_ADDRESS=10.13.13.18 > SUBNET_MASK=255.255.255.252 > MTU=1492; > INTERFACE NAME=VIRLNK2 > IP_ADDRESS=10.13.13.22 > SUBNET_MASK=255.255.255.252 > MTU=1492; > RIP_INTERFACE NAME=OSA9000LNK > IP_ADDRESS=172.28.3.131 > SUBNET_MASK=255.255.255.192 > RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES > MTU=1492; > RIP_INTERFACE NAME=OSA9100LNK > IP_ADDRESS=172.28.3.195 > SUBNET_MASK=255.255.255.192 > RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES > MTU=1492; > RIP_INTERFACE NAME=OSA9104LNK > IP_ADDRESS=10.13.13.161/27 > RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES > MTU=1492; > RIP_INTERFACE NAME=OSA9210LNK > IP_ADDRESS=172.28.3.31 > SUBNET_MASK=255.255.255.192 > RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES > MTU=1492; > RIP_INTERFACE NAME=OSA9313LNK > IP_ADDRESS=10.13.13.162 > SUBNET_MASK=255.255.255.224 > RIPV2=YES > RECEIVE_RIP=YES > RECEIVE_DYNAMIC_NETS=YES > RECEIVE_DYNAMIC_SUBNETS=YES > RECEIVE_DYNAMIC_HOSTS=YES > MTU=1492; > > Level 2 Parms: > > 10.13.13.26 VIRLNK1 > 172.28.3.140 OSA9012LNK > > DEVICE VIRDEV1 VIRTUAL 0 > LINK VIRLNK1 VIRTUAL 0 VIRDEV1 > DEVICE OSA9012 OSD 9012 PORTNAME OSA1 NONROUTER AUTORESTART > LINK OSA9012LNK QDIOETHERNET OSA9012 > > INTERFACE NAME=VIRLNK1 > IP_ADDRESS=10.13.13.26 > SUBNET_MASK=255.255.255.252 > MTU=1492; > RIP_INTERFACE NAME=OSA9012LNK > IP_ADDRESS=172.28.3.140 > SUBNET_MASK=255.255.255.192 > RIPV2=YES > MTU=1492; > > -- Dave Jones V/Soft Software www.vsoft-software.com Houston, TX 281.578.7544
