My controllers. DTCVSW1,2 are AUTOLOGed before the GRANTS, but there is only a 10 sec sleep.
'CP XAUTOLOG GCS' 'CP XAUTOLOG DTCVSW1' 'CP XAUTOLOG DTCVSW2' 'CP SLEEP 10 SEC' 'CP XAUTOLOG NETVIEW' 'CP XAUTOLOG NETSPY' 'CP XAUTOLOG OPERSYMP' 'CP XAUTOLOG RSCSSERV' 'CP XAUTOLOG VTAM' Also TCPIP IUCVs to VSWITCH. Does that mean TCPIP is acting as the CONTROLLER and must be up before the GRANTS? USER TCPIP TCPIP 128M 256M ABG INCLUDE TCPCMSU OPTION QUICKDSP SVMSTAT MAXCONN 1024 DIAG98 APPLMON SHARE RELATIVE 3000 IUCV ALLOW IUCV ANY PRIORITY IUCV *CCS PRIORITY MSGLIMIT 255 IUCV *VSWITCH MSGLIMIT 65535 * CHANGE SPECIAL FROM 9104 TO 9108 PER SAM 9/30/09 SPECIAL 9108 QDIO 3 SYSTEM OSALAN LINK 5VMTCP40 491 491 RR LINK 5VMTCP40 492 492 RR LINK TCPMAINT 591 591 RR LINK TCPMAINT 592 592 RR LINK TCPMAINT 198 198 RR MDISK 191 3390 2258 005 540W02 MR RTCPIP WTCPIP MTCPIP Alan Altmark <alan_altm...@us.ibm.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 11/01/2010 03:34 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: No IPL VSWITCH Connectivity On Monday, 11/01/2010 at 03:10 EDT, George Henke/NYLIC <george_he...@newyorklife.com> wrote: > After IPL we can destroy the VSWITCH: > > det vswitch lnxvsw1 > > Then issue the same commands as in the IPL below and everything connects. > > Why? > > Are there some restrictions, considerations, for defining the VSWITCH at IPL > time? > > SYSTEM CONFIG: > > define vswitch lnxvsw1 portname lnxvsw1 rdev 9004 I suggest that you remove the PORTNAME LNXVSW1. It isn't needed and it can create unnecessary confusion. > AUTOLOG1: PROFILE EXEC: > > 'CP SET VSWITCH LNXVSW1 GRANT VLINUX1' > 'CP SET VSWITCH LNXVSW1 GRANT VLINUX2' > 'CP SET VSWITCH LNXVSW1 GRANT VLINUX3' > 'CP SET VSWITCH LNXVSW1 GRANT VLINUX4' > 'CP SET VSWITCH LNXVSW1 GRANT VLINUX5' > 'CP SLEEP 10 SEC' Why sleep 10 sec? The SET VSWITCH commands take effect immediately. > 'CP XAUTOLOG VLINUX1' > 'CP XAUTOLOG VLINUX2' > 'CP XAUTOLOG VLINUX3' A VSWITCH establishes connectivity to the outside world once the controllers (DTCVSW1/2) are up. Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 alan_altm...@us.ibm.com IBM Endicott
