When VM is using an IODF and MVS is on the box doesn't the changes show up in 
VM when the IODF is activated in HCD?

I though the Dynamic commands in VM only needed to happen if you are using an 
IOCDS and IOCP to maintain the HW.

When the Hardware Configuration(HAS) matches the loaded IOCDS and the SET 
IOCDS_ACTIVE Ax command is issued Then you get a good RC If they do not match 
then you get an error.

Larry Davis

From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf 
Of George Henke/NYLIC
Sent: Thursday, November 11, 2010 3:17 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: HCM/HCD from IOCP

1.      Just get, via FTP, emulator upload, sneaker net, or whatever,  the IOCP 
source from whoever maintains it,
2.      Make your changes and send it back to them.
3.      When they process it through HCD it will produce a production IODF file 
which can then be exported as a sequential file back to you.
4.      Then you just load it onto you parm disk and follow the dynamic 
reconfig process given in SET IOCDS ACTIVE in CP COMMANDS.


"Frank M. Ramaekers" <framaek...@ailife.com>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>

11/11/2010 03:00 PM
Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>


To

IBMVM@LISTSERV.UARK.EDU

cc

Subject

Re: HCM/HCD from IOCP




5.


Can't do that, you don't actually get access to any source (that I can
tell):

1HCD                                      Time: 13:49 Date: 10-11-11
Page:    1
z/VM 5.4.0 HCD

0(1) FILE=A1 IOCP A

-Statement Orig Sev  Msgid    Message Text

0                E  CBDD600I  HLASM MODULE not found.

-Total Messages  Terminating     Error     Warning  Informational

          1                       1

0Return Code was   8



Frank M. Ramaekers Jr.



-----Original Message-----
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Mike Walter
Sent: Friday, November 05, 2010 9:01 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: HCM/HCD from IOCP

Does your company have HLASM on any other System z O.S.?  If so it would

seem that you could send the file there, run HLASM on it, and send the
results back to z/VM.

Or... talk to your IBM rep or IBM business partner to see if IBM might
HLASM this file for your one-time conversion effort.  I seem to remember

an IBM'er stating within the past few weeks that such was possible  -
check the IBMVM-L archives using the web browser version in place of
e-mail.  If you don't have that web site, it is:
http://listserv.uark.edu/archives/ibmvm.html

Mike Walter
Aon Corporation
The opinions expressed herein are mine alone, not my employer's.



"Frank M. Ramaekers" <framaek...@ailife.com>

Sent by: "The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU>
11/05/2010 07:50 AM
Please respond to
"The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU>



To
IBMVM@LISTSERV.UARK.EDU
cc

Subject
HCM/HCD from IOCP






I want to convert my IOCP to HCM/HCD, but one of the requirements is
HLASM, which I do not have and will not be able to convince management
to
purchase for a one time conversion.

Options?

TIA,


Frank M. Ramaekers Jr.



Systems Programmer
MCP, MCP+I, MCSE & RHCE

American Income Life Insurance Co.
Phone: (254)761-6649

1200 Wooded Acres Dr.
Fax: (254)741-5777

Waco, Texas  76701



_____________________________________________________ This message
contains information which is privileged and confidential and is solely
for the use of the intended recipient. If you are not the intended
recipient, be aware that any review, disclosure, copying, distribution,
or
use of the contents of this message is strictly prohibited. If you have
received this in error, please destroy it immediately and notify us at
privacy...@ailife.com.




The information contained in this e-mail and any accompanying documents
may contain information that is confidential or otherwise protected from
disclosure. If you are not the intended recipient of this message, or if
this message has been addressed to you in error, please immediately
alert the sender by reply e-mail and then delete this message, including
any attachments. Any dissemination, distribution or other use of the
contents of this message by anyone other than the intended recipient is
strictly prohibited. All messages sent to and from this e-mail address
may be monitored as permitted by applicable law and regulations to
ensure compliance with our internal policies and to protect our
business. E-mails are not secure and cannot be guaranteed to be error
free as they can be intercepted, amended, lost or destroyed, or contain
viruses. You are deemed to have accepted these risks if you communicate
with us by e-mail.

_____________________________________________________

This message contains information which is privileged and confidential and is 
solely for the use of the

intended recipient. If you are not the intended recipient, be aware that any 
review, disclosure,

copying, distribution, or use of the contents of this message is strictly 
prohibited. If you have

received this in error, please destroy it immediately and notify us at 
privacy...@ailife.com.
<http://listserv.uark.edu/archives/ibmvm.html>

Reply via email to