I think I have tried this, did not solve the case. Janne -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Les Geer (607-429-3580) Sent: 30. marraskuuta 2010 14:21 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: DDR multivolume tape as output
If you are issuing the DDR command from MAINT, first select a free device and attach it to maint using the MULTIuser attach option. Then from another ID that is authorized to issue the DFSMSRM command, issue: DFSMSRM MOUNT CAT SCRATCH0 (ATTACH MAINT RDEV xxxx where xxxx is the device you already attached to MAINT. When the first tape is full, go to the second ID and issue the mount command again. Best Regards, Les Geer IBM z/VM and Linux Development >Unfortunatelly this did not help. > >I made the mount as Kris suggested, then started my DDR session. > >Got HCP704E DEVICE <rdev!vdev> NOT OPERATIONAL (because rdev is not atta= >ched to my DDR-user, I think) > > >________________________________ >From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On >Beh= alf Of Kris Buelens >Sent: 30. marraskuuta 2010 10:53 >To: IBMVM@LISTSERV.UARK.EDU >Subject: Re: DDR multivolume tape as output > >I've got no experience with DFSMRM >But, what about: > DFSMSRM MOUNT CAT SCRATCH0 (NOATTACH RDEV xxxx executed from another >userid, and xxxx is the real devioce number of the ta= pe MAINT has >gotten as 181 (info gotten via HELP DFSMS) > >2010/11/30 Janne Jarvinen ><janne.jarvi...@logica.com<mailto:janne.jarvi...@= >logica.com>> >Hello, > >I'm a z/OS person and have some diffuculties to uderstand how to use >VTS tapes in z/VM environment, hopefully get some help from this forum. > >How to mount the second DDR dump-tape under VM? > >Want to DUMP my SYSRES to tape: > >1. MAINT: DFSMSRM MOUNT CAT SCRATCH0 > > >DGTUIR2026I DFSMS request 84 accepted for processing Ready; >T=3D0.01/0.01 >10:24:22 >TAPE 0D3F ATTACHED TO MAINT >0D3F > 10:24:24 * MSG FROM RMSMASTR: FSMBCR2120I Request 84 complete; volume >V900 > 02, category SCRATCH0, mounted on device 0D3F in library >IBMVTS1 > 10:24:24 * MSG FROM RMSMASTR: FSMBEC2125I Request 84: device 0D3F >attached > to MAINT as 0D3F; access mode =3D >READWRITE > >2. MAINT DDR >SYS CONS >IN 123 DASD >OUT D3F TAPE >DUMP ALL >YES > >3. After writing the first tape full, DDR want's the second one. >How to mount it? The rdev d3f is attached to MAINT, so can't mount from >another machine/user. MAINT is "in DDR session" so can't mount from >there either. > >4. The tapesystem is VTS using 3584 library. >Any ideas how to get the following output tapes mounted? >(I tested DDR output parm altape to write two tapes but then third tape >was= > >required and there I was again ... ) > Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
