Thanks, I think that is what I was looking for.

On Tue, Jan 11, 2011 at 8:59 AM, Schuh, Richard <rsc...@visa.com> wrote:

>  If they are NOTACCEPTED, as Gregg Reed suggests, they are covered both
> when they are added dynamically and when VM is subsequently  ipled. You can
> use commands to add them to your configuration as needed. Just remember to
> take them out of the NOTACCEPTED list so that they will be part of your
> system after an ipl.
>
>
> Regards,
> Richard Schuh
>
>
>
>
>  ------------------------------
> *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On
> Behalf Of *Shimon Lebowitz
> *Sent:* Tuesday, January 11, 2011 8:21 AM
>
> *To:* IBMVM@LISTSERV.UARK.EDU
> *Subject:* Re: IO configuration question?
>
>   I think you also might want to check your New_Devices setting in the
> SYSTEM CONFIG.
> If it is enabled, new devices will be brought online when the system sees
> them appear.
>
>
> On Tue, Jan 11, 2011 at 5:32 PM, Macioce, Larry <
> larry.maci...@com.state.oh.us> wrote:
>
>>  I would ask the z/OS guy what his IOCDS shows in the way of dasd i/o
>> devices and put those in the offline at ipl list.
>>
>> Then as you need them bring them online
>>
>> Mace
>>
>>
>>
>> *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On
>> Behalf Of *Tom Huegel
>> *Sent:* Tuesday, January 11, 2011 10:16 AM
>> *To:* IBMVM@LISTSERV.UARK.EDU
>> *Subject:* IO configuration question?
>>
>>
>>
>> Greetings,
>>
>>
>>
>> I have a guestion regaurding z/VM I/O configuration. After I IPL my z/VM I
>> have about a dozen devices (DASD) defined (Q DASD FREE), which is what I
>> expect. But at some time during the life of the IPL the z/OS admin loads a
>> new IOCDS (I think that is what is going on) I suddenly have several hundred
>> devices online.
>>
>> The question: Is there a way I can prevent this from happening? I still
>> want the ability to vary some of those devices online as needed.
>>
>>
>>
>> Thanks
>>
>> Tom
>>
>> ------------------------------
>>
>> ********************************************************************* The
>> information transmitted is intended solely for the individual or entity to
>> which it is addressed and may contain confidential and/or privileged
>> material. Any review, retransmission, dissemination or other use of or
>> taking action in reliance upon this information by persons or entities other
>> than the intended recipient is prohibited. If you have received this email
>> in error please contact the sender and delete the material from any
>> computer.
>> ******************************************************************** *
>>
>
>

Reply via email to