When I see a Disabled Wait PSW of 1010 - I think of no console available. did you try and vary on the processor after the 9152E message ?
Bill Munson Sr. z/VM Systems Programmer Brown Brothers Harriman & CO. 525 Washington Blvd. Jersey City, NJ 07310 201-418-7588 From: "Burton, Randy" <rbur...@bbandt.com> To: IBMVM@LISTSERV.UARK.EDU Date: 06/14/2011 09:46 AM Subject: zVM crash Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> I'm curious if this error rings a bell with any of you. We of course have an ETR open and are working with IBM. No hardware errors on the HMC, so we believe this was software and not hardware. Here's the last operator log message before the LPAR went into a disabled wait: HCPMPG9152E PROCESSOR 01 IS BEING VARIED OFFLINE BECAUSE IT IS NOT RESPONSIVE. Disabled wait PSW was: 00020000000000000000000000001010 HMC message was: Central processor (CP) 0 in partition VMD1, entered disabled wait state. Fortunately this was our development (test) zVM system, running a bunch of test zLinux guests. We're running zVM 6.1 on a z10. Of course we are nervous because what happens in test can happen in production. We IPLed and so far so good. Thanks in advance for any help/suggestions! Randy Burton BB&T Bank *************************** IMPORTANT NOTE*****************************-- The opinions expressed in this message and/or any attachments are those of the author and not necessarily those of Brown Brothers Harriman & Co., its subsidiaries and affiliates ("BBH"). There is no guarantee that this message is either private or confidential, and it may have been altered by unauthorized sources without your or our knowledge. Nothing in the message is capable or intended to create any legally binding obligations on either party and it is not intended to provide legal advice. BBH accepts no responsibility for loss or damage from its use, including damage from virus. ********************************************************************************