What context does a failure have here? Is it a failure to properly validate a
signature you can understand, or could it also encompass signatures which the
receiver does not support? If only the former, would you want to denote ones
which you do not understand? 14.6 says a signature you don’t understand is a
PERMERROR for evaluation.
Would it be advantageous to keep the states to three values (pass/fail/DNE),
and maybe comma-separate the ones in each state?
From:
DKIM2-Signature: i=1; d=sender.example;
s=rsa.sel:rsa-sha256:rsa+sig,mldsa44.sel:mldsa44:mldsa+sig|ed25519.sel:ed25519-sha256:ed25519+sig
<record>
<row>
<source_ip>127.0.0.1</source_ip>
<count>1</count>
...
</row>
<identifiers>
<header_from>forwarder.example</header_from>
</identifiers>
<auth_results>
<dkim2>
<domain>sender.example</domain>
<result>pass</result>
<selector>rsa.sel,mldsa.sel</selector>
</dkim2>
<dkim2>
<domain>sender.example</domain>
<result>fail</result>
<selector>NULL</selector>
</dkim2>
<dkim2>
<domain>sender.example</domain>
<result>DNE</result>
<selector>ed25519.sel</selector>
</dkim2>
<dkim2>
<domain>forwarder.example</domain>
<result>pass</result>
<selector>rsa.sel</selector>
</dkim2>
<spf>
<domain>forwarder.example</domain>
<result>pass</result>
</spf>
</auth_results>
</record>
--
Alex Brotman
Sr. Engineer, Anti-Abuse & Messaging Policy
Comcast
From: Wei Chuang <[email protected]>
Sent: Wednesday, November 11, 2026 7:06 PM
To: [email protected]
Subject: [Ietf-dkim] Re: Support New Algorithms w/DKIM2 DMARC Report Feedback
And sorry about the example formatting, which was randomly put together.
Here's a more accurate XSD version:
<record>
<row>
<source_ip>127.0.0.1</source_ip>
<count>1</count>
...
</row>
<identifiers>
<header_from>forwarder.example</header_from>
</identifiers>
<auth_results>
<dkim2>
<domain>sender.example</domain>
<result>pass</result>
<selector>rsa.sel</selector>
</dkim2>
<dkim2>
<domain>sender.example</domain>
<result>pass</result>
<selector>mldsa44.sel</selector>
</dkim2>
<dkim2>
<domain>forwarder.example</domain>
<result>pass</result>
<selector>rsa.sel</selector>
</dkim2>
<spf>
<domain>forwarder.example</domain>
<result>pass</result>
</spf>
</auth_results>
</record>
-Wei
On Wed, Nov 11, 2026 at 2:36 PM Wei Chuang
<[email protected]<mailto:[email protected]>> wrote:
In some offline discussions, there are two clarifications:
1) Todd points out that redacting DMARC report information would be pretty
useful to spammers and phishers. So let's drop that idea.
2) Richard points out that the "feedback" and "feedhere" flags are for a
feedback loop mechanism unrelated to DMARC reports. In that case, this
proposes a new "dmarcreport" flag that notifies receivers that DMARC reports
are requested.
-Wei
On Wed, Nov 11, 2026 at 12:41 PM Wei Chuang
<[email protected]<mailto:[email protected]>> wrote:
Hi,
We need a way to get feedback for new algorithms bring-up and understand
deliverability with DKIM2. This proposes modifying RFC9990 DMARC reports to
support DKIM2 to leverage the existing DMARC reporting infrastructure.
Multiple DKIM2 signatures can be supported very similarly to DKIM
multisignatures. Another alternative is to create a new DKIM report standard
but this risks losing support of the existing base of DMARC report senders.
Further the ability to get reports from intermediaries exists in the unexplored
DKIM2 spec "feedback" and "feedhere" flags that we examine later.
Let's look at a forwarding example with multiple signatures at the originator:
From: [email protected]<mailto:[email protected]>
DKIM2-Signature: i=1; d=sender.example;
s=rsa.sel:rsa-sha256:rsa+sig,mldsa44.sel:mldsa44:mldsa+sig|ed25519.sel:ed25519-sha256:ed25519+sig
DKIM2-Signature: i=2; d=forwarder.example; s=rsa.sel:rsa-sha256:rsa+sig
Below is a snippet of the proposed DMARC report for DKIM2 that is sent to the
originator sender.example. As noted in the "DKIM2 / DMARC Sender Policy
Proposal" thread, the originator i.e. message author by default gets a DMARC
report. We see the multiple signature results designated by the selectors
"rsa.sel" and "mldsa44.sel" from signatures created by the originator. Note
that the "ed25519.sel" was not evaluated as that was short circuited. (This is
a strawman to see if that's the right evaluation with "any" behavior i.e. '|'.
Happy to see what feedback there is about the short circuit idea) You can see
that both the originator's and forwarder's results are presented, though it's
possible that the receiver may choose to reduce the scope of the results
record: {
row: {
Source_ip: "127.0.0.1"
Count: 1
...
}
identifiers: {
Header_from: "forwarder.example"
}
auth_results: {
dkim2: {
Domain: "sender.example"
Result: "pass"
Selector: "rsa.sel"
}
dkim2: {
Domain: "sender.example"
Result: "pass"
Selector: "mldsa44.sel"
}
dkim2: {
Domain: "forwarder.example"
Result: "pass"
Selector: "rsa.sel"
}
spf: {
Domain: "forwarder.example"
Result: "pass"
}
}
}
DKIM2 spec also has "feedback" and "feedhere" flags. This proposes that
forwarders who have "feedback" flag may get the DMARC reports. If so, the
receiver looks up the DMARC policy corresponding to the "d=" domain and send
reports to the "rua" and "ruf" addresses. "feedback" here provides a privacy
sensitive bounce. It can also be used as a privacy signal to indicate the
DMARC report redaction of the results of that domain that would otherwise be
sent to other domains.
This example illustrates "feedback" and "feedhere" flags where the forwarder
requests DMARC reports.
From: [email protected]<mailto:[email protected]>
DKIM2-Signature: i=1; d=sender.example;
s=rsa.sel:rsa-sha256:rsa+sig,mldsa44.sel:mldsa44:mldsa+sig|ed25519.sel:ed25519-sha256:ed25519+sig;
f=feedhere
DKIM2-Signature: i=2; d=forwarder.example; s=rsa.sel:rsa-sha256:rsa+sig;
f=feedback
A DMARC report can be sent to forwarder.example,but it is filtered to excludes
results from sender.example that have the feedhere flag.
record: {
row: {
Source_ip: "127.0.0.1"
Count: 1
...
}
identifiers: {
Header_from: "forwarder.example"
}
auth_results: {
dkim2: {
Domain: "forwarder.example"
Result: "pass"
Selector: "rsa.sel"
}
spf: {
Domain: "forwarder.example"
Result: "pass"
}
}
}
-Wei
_______________________________________________
Ietf-dkim mailing list -- [email protected]
To unsubscribe send an email to [email protected]