But how does my application access it? DHCP is not something that an application layer program should be allowed to perform. It is a security issue. For good reason performing DHCP operations requires privileges beyond mere network connectivity on Windows.
That is why configuring application programs from DHCP never caught on. > -----Original Message----- > From: John Schnizlein [mailto:[EMAIL PROTECTED] > Sent: Sunday, April 22, 2007 6:41 PM > To: David W. Hankins > Cc: GEOPRIV WG; ietf@ietf.org > Subject: Re: [Geopriv] Confirmation of GEOPRIV IETF 68 > Working Group Hums > > The reason that DHCP is appropriate for information about the > location of the host is that the scope of DHCP administration > usually does match the local network to which the host is > attached. Location is local information. > > John > > On Apr 20, 2007, at 3:38 PM, David W. Hankins wrote: > > > The point is that the ISO L(x) is not what one considers > when judging > > wether or not a certain configuration value "would make a good band > > name. I mean DHCP option." > > > > What we (strive to) consider instead is the administrative scope of > > the configuration information, and wether it matches common and > > practical use of DHCP. > > > On Apr 19, 2007, at 7:47 PM, David W. Hankins wrote: > > On Thu, Apr 19, 2007 at 03:38:40PM -0700, Hallam-Baker, > Phillip wrote: > >> DHCP is a layer 3 technology that talks directly to layer 2. > > > > DHCP is a technology that dynamically configures hosts. > > > > If a host has a configuration knob that might reasonably > and properly > > be set by the systems administrator or the network you are > presently > > attached to, then it is reasonable and proper to configure it via > > DHCP. > > > _______________________________________________ > Ietf mailing list > Ietf@ietf.org > https://www1.ietf.org/mailman/listinfo/ietf > _______________________________________________ Ietf mailing list Ietf@ietf.org https://www1.ietf.org/mailman/listinfo/ietf