Hi Jerry I think that the reason of removing the "Maximum Packet Size [M] (32-bit unsigned integer)" parameter from the QSPEC specification was that this parameter is only relevant for some QoS models that are used on an end-to-end basis, such as Y.1541 QOSM. I would therefore prefer that this parameter should not be specified in the QSPEC draft. In my opinion this parameter should be specified as an TMOD extension in any QoS model that needs it. I believe that Y.1541 QOSM already does specify the "Maximum Packet Size [M] (32-bit unsigned integer)" parameter in Section 3.1.
Best regards, Georgios On 11/30/2009, "Gerald Ash" <gash5...@yahoo.com> wrote: >All, > >Al Morton has recently raised concerns RE taking the Maximum Packet Size <M> >parameter out of the QSPEC document. Based on his comments (given below, >along with other background), it appears that the <M> parameter should be put >back into the QSPEC. > > >Please comment on whether the <M> parameter should be put back into the QSPEC. > >Thanks, >Jerry > >Background: > >The Maximum Packet Size Parameter <M> was taken out back in July 2005 in QSPEC >version 5, with the following explanation in the change history: > > > >" Version -05: > > - discarded QSPEC parameter <M> (Maximum packet size) since MTU > discovery is expected to be handled by procedure currently defined > by PMTUD WG" > >Some further explanation for removing the parameter <M> is given in a message >posted by Cornelia Kappler on the IETF web-site at >http://www.ietf.org/mail-archive/web/nsis/current/msg07923.html: > >"AW: [NSIS] smallest path MTU - Maximum Packet Size [M] > > > > >To: "ext Bernd Schloer" <bschloer at cs.uni-goettingen.de>, <nsis at ietf.org> >Subject: AW: [NSIS] smallest path MTU - Maximum Packet Size [M] >From: "Kappler, Cornelia" <cornelia.kappler at nsn.com> >Date: Fri, 1 Jun 2007 09:53:50 +0200 >Cc: >In-reply-to: <465c9bae.1050...@cs.uni-goettingen.de> >List-help: <mailto:nsis-requ...@ietf.org?subject=help> >List-id: Next Steps in Signaling <nsis.ietf.org> >List-post: <mailto:n...@ietf.org> >List-subscribe: <https://www1.ietf.org/mailman/listinfo/nsis>, ><mailto:nsis-requ...@ietf.org?subject=subscribe> >List-unsubscribe: <https://www1.ietf.org/mailman/listinfo/nsis>, ><mailto:nsis-requ...@ietf.org?subject=unsubscribe> >References: <465c9bae.1050...@cs.uni-goettingen.de> >Thread-index: AceiOM3OwdCeaEOuS267eWNZJzBL6QB6Qufg >Thread-topic: [NSIS] smallest path MTU - Maximum Packet Size [M] > >Hi all, > >at the Interim meeting in May 2005 we decided to drop the MTU, see >http://www.ietf-nsis.org/nsis/Munich_Interim_Meeting/MeetingMinutes.html > >Cornelia > >> -----Ursprüngliche Nachricht----- >> Von: ext Bernd Schloer [mailto:bschloer at cs.uni-goettingen.de] >> Gesendet: Dienstag, 29. Mai 2007 23:31 >> An: nsis at ietf.org >> Betreff: [NSIS] smallest path MTU - Maximum Packet Size [M] >> >> Hi, >> >> in version 13 of the QSPEC-draft the Maximum Packet Size [M] >> was removed from the >> TMOD parameter (former Traffic parameter). >> >> RFC2211 mentions, that links are not permitted to fragment >> packets which receive >> the controlled-load service and packets larger than the MTU >> of the link are treated >> as non-conformant to the TSPEC. >> >> What was the reason to omit this parameter? >> >> Best regards, >> Bernd" >Hannes Tschofenig kindly provided links to the Munich Interim Meeting Minutes >at > >http://www.tschofenig.priv.at/nsis/munich/MeetingMinutes.html > >It appears that the discussion of MTU discovery somehow led to a conclusion >that the maximum packet size parameter <M> should be eliminated as well, as >documented in this portion of the minutes: > >"A QoS Model for Signaling IntServ Controlled-Load Service with NSIS >=================================================================== > >http://www.ietf.org/internet-drafts/draft-kappler-nsis-qosmodel-controlledload-01.txt > >Slides: >http://www.ietf-nsis.org/nsis/Munich_Interim_Meeting/Ctrld_Load_QOSM_Interim_Munich.ppt > >Cornelia Kappler presents and she starts with an overview of IntServ. > >What is IntServ Controlled-Load service? >-IntServ Controlled Load Service is (in NSIS terms) a QoS Model >-RFC 2210 specifies how to signal for Controled load using RSVP >-This ID specifies how to signal for Controled Load using NSIS >-Controlled-Load Service (RFC 2211) >-Provides approximatively service of an unloaded best-effort network >-QoS parameters signaled are Token Bucket and MTU >-Implemented per "network element", i.e. per-router or per-subnet >Can be used for >Reserving resources per-flow per-router >Admission control at edge of Diffserv domains >Admission control into MPLS clouds > >How to signal for Controlled Load service with NSIS >-Role of QNEs >-One or more QNR per "network element" >-Stateless QNEs? >-Provide approximatively service of an uiloaded best-effort network may also >be possible with stateless QNEs > >Discussion started about MTU insertion in the QoS NSLP since not all routers >would be supporting the NSIS Qos NSLP it was decided to remove the MTU >discovery from controlled load and Qos-NSLP draft. If required MTU discovery >would be using mechanisms out of scope of NSIS (PMTUD or other)" > >Bernd Schloer raised the concern of eliminating <M> in his message referenced >above: > >"In version 13 of the QSPEC-draft the Maximum Packet Size [M] was removed from >the TMOD parameter (former Traffic parameter). > >RFC2211 mentions, that links are not permitted to fragment packets which >receive the controlled-load service and packets larger than the MTU of the >link are treated as non-conformant to the TSPEC. > >What was the reason to omit this parameter?" > >Al Morton raised the same and additional concerns in a recent discussion: > >"It seems to me that several points were missed >by citing the Packetization Layer Path MTU Discovery (PLPMTUD) >[note: see RFC 4821 http://www.rfc-editor.org/rfc/rfc4821.txt] >as a replacement for specifying M, Max Pkt size: > > - only the sending end-point will store what PLPMTUD discovers, > intermediate points where shaping or policing reside will not > know the Max pkt size the sender intends to use. > > - the Max packet size that a sender uses may be much less than MTU, > VoIP is the most obvious example. > >Or, it wasn't understood that M was a critical part of the peak >rate definition. From RFC 2212: > The peak rate, p, is measured in bytes of IP datagrams per second and > has the same range and suggested representation as the bucket rate. > The peak rate is the maximum rate at which the source and any > reshaping points (reshaping points are defined below) may inject > bursts of traffic into the network. More precisely, it is a > requirement that for all time periods the amount of data sent cannot > exceed M+pT where M is the maximum datagram size and T is the length > of the time period. > >Note that parameter M is part of the RFC 2212 TSPEC, and M is apparently >different from the MTU: > Links are not permitted to fragment datagrams as part of guaranteed > service. Datagrams larger than the MTU of the link MUST be policed > as non-conformant which means that they will be policed according to > the rules described in the Policing section below." > >It seems that Bernd and Al have raised valid concerns: discovery of MTU does >not eliminate the need to specify <M> in the TMOD parameter. It appears that >the <M> parameter should be put back in the QSPEC. It should not be a big >issue since <M> was already there in the QSPEC up through version 4 (see >http://www.watersprings.org/pub/id/draft-ietf-nsis-qspec-04.txt). > > > >--- On Wed, 11/11/09, The IESG <iesg-secret...@ietf.org> wrote: > > >From: The IESG <iesg-secret...@ietf.org> >Subject: [NSIS] Last Call: draft-ietf-nsis-qspec (QoS NSLP QSPEC Template) to >Informational RFC >To: "IETF-Announce" <ietf-annou...@ietf.org> >Cc: n...@ietf.org >Date: Wednesday, November 11, 2009, 4:09 AM > > >The IESG has received a request from the Next Steps in Signaling WG >(nsis) to consider the following document: > >- 'QoS NSLP QSPEC Template ' > <draft-ietf-nsis-qspec-22.txt> as an Informational RFC > >The IESG plans to make a decision in the next few weeks, and solicits >final comments on this action. Please send substantive comments to the >ietf@ietf.org mailing lists by 2009-11-25. Exceptionally, >comments may be sent to i...@ietf.org instead. In either case, please >retain the beginning of the Subject line to allow automated sorting. > >The file can be obtained via >http://www.ietf.org/internet-drafts/draft-ietf-nsis-qspec-22.txt > > >IESG discussion can be tracked via >https://datatracker.ietf.org/public/pidtracker.cgi?command=view_id&dTag=12323&rfc_flag=0 > >_______________________________________________ >nsis mailing list >n...@ietf.org >https://www.ietf.org/mailman/listinfo/nsis > > > > ) _______________________________________________ Ietf mailing list Ietf@ietf.org https://www.ietf.org/mailman/listinfo/ietf