Hi all, Can the EXAFS of the L1 edge of 3rd row transition elements be analyzed? I've never tried it, and the discussion so far has been for the L2 and L3 edges. I know there would be some interference from the EXAFS of the lower edges, but that's just a technical problem, and can be corrected for.
--Scott Calvin Sarah Lawrence College On Apr 11, 2013, at 10:03 AM, Dr. Dariusz A. Zając <ki...@ifj.edu.pl> wrote: > Hi, > > in Athena you can still normalize data, plot together, etc, but due to that > lines L2 and L3 are very closed you will observe no EXAFS oscillations. > In opposite I use Athena and Artemis to analyse EXAFS on e.g. O K edge > L edges for EXAFS are useful for mainly 5d and actined elements... > > regards > kicaj > > W dniu 13-04-11 13:46, Shoaib Muhammad pisze: >> Hi, >> >> I am a research student and relatively new to XAFS. I have soft X-Ray L-edge >> data of Mn and Ni. Is it possible to process this data in Athena and then >> fit in Artemis like usual K-edge data? >> >> Thanks >> -- >> Shoaib _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
