Ok, so it's fixed now. I left these values as the internal IP (NAT) space, because I figured as far as the server is concerned...this is what it thinks its external IP is (because of the NATing). However, it appears the system needs the real external IP (or DNS name) in there regardless of the NAT, which I modified and everything seems to be working better now.
Wow. I can't believe I actually didn't just try that before. Very unlike me. <grin> Thanks for the help though! Can't wait to really start playing now... Cheers, AL Balakrishnan KalIdas wrote, On 12/10/2009 11:00 PM: > Hi AL, > > Is 10.0.0.162 accessible over WAN? Looks like it is not, as the protocol > returns "Unknown Host". > > What is the Public URL and Private URL set in the server's Simias.config > file (the file is available in the data area or can be viewed from the server > page of Admin console). > > Kalis > > >>>> On 12/11/2009 at 2:09 AM, in message<[email protected]>, Al >>>> > Bsharah<[email protected]> wrote: > >> Hey Kalis, thanks for the instructions... >> >> Attached is a ZIP file with the following contents: >> 1) SERVER-Simias.access.log >> 2) SERVER-Simias.log >> 3) LAN-Simias.log >> 4) WAN-Simias.log /(domain name has been obscured in this file)/ >> >> Timing: >> 12:05 - Started the server around this time >> 12:07 - Started the LAN-based thick client, and performed a successful >> sync. Shut down the client. >> 12:08 - Started the WAN-based thick client, attempted connection. >> 12:09 - Attempted another connection from WAN-based thick client. Shut >> down the client. >> >> FYI - I've also obscured my domain in the WAN-Simias.log file. If >> someone wants to test directly with it, please let me know. >> >> Thanks for the help! >> AL >> >> >> Balakrishnan KalIdas wrote, On 12/9/2009 10:32 PM: >> >>> So, you are able to use the Windows thick client and connect to the iFolder >>> >> server over LAN? >> >>> If that is the case, is it possible to get the debug logs(server and >>> >> client) and send it across. Follow the link below to enable the debug logging >> for both server and client. >> >>> >>> >> http://www.novell.com/communities/node/9007/novell-ifolder-debugg-logging-enabli >> ng-and-uses >> >>> Kalis >>> >>> >>> >>>>>> On 12/10/2009 at 10:04 AM, in message<[email protected]>, Al >>>>>> >>>>>> >>> Bsharah<[email protected]> wrote: >>> >>> >>>> Hi, Kalis. >>>> >>>> Just to be clear, I *can* connect from other Windows Servers on my >>>> LAN...I just can't connect over the WAN. Wanted to make sure we were >>>> all on the same page. >>>> >>>> Secondly, where do I submit a bug? I've looked on ifolder.com, >>>> sourceforge.net, etc...and I can't seem to find any way to submit (other >>>> than the ifolder-devel@ list that I see you submitted a report to >>>> (regarding this). Is that what needed to be done? >>>> >>>> Thanks all... Out of curiosity, as I'm new to iFolder, how long does >>>> the dev cycle usually run before bugs like this are resolved? >>>> >>>> Thanks again! >>>> AL >>>> >>>> Balakrishnan KalIdas wrote, On 12/8/2009 6:49 PM: >>>> >>>> >>>>> Hi AL, >>>>> >>>>> Currently there is a bug for non-LDAP connection from client. You can >>>>> >> raise >> >>>>> >>>>> >>>> a bug. >>>> >>>> >>>>> Ravi is the Admin for the mailing lists. I will let him handle the >>>>> other >>>>> >>>>> >>>> part. But till that list is setup, you can post it here. >>>> >>>> >>>>> Kalis >>>>> >>>>> >>>>> >>>>> >>>>>>>> Al Bsharah 12/08/09 10:34 PM>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>> Hi Kalis, thanks for the reply! >>>>> >>>>> Yes, I did configure it without LDAP suppport... >>>>> >>>>> (BTW - I see that there's a new ifolder-users list...which doesn't >>>>> appear to be set up yet. I assume that's where these questions will go >>>>> in the future?) >>>>> >>>>> Thanks, >>>>> AL >>>>> >>>>> >>>>> Balakrishnan KalIdas wrote, On 12/7/2009 11:08 PM: >>>>> >>>>> >>>>> >>>>>> Hi AL, >>>>>> >>>>>> Is your iFolder server configured for Internal Identity source >>>>>> >> (non-LDAP)?= >> >>>>>> >>>>>> Kalis >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>> On 12/8/2009 at 4:27 AM, in message<[email protected]>, Al >>>>>>>>> >>>>>>>>> >>>> Bsharah >>>> >>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> Hi folks, is this the place I should be asking these questions? If it's >>>>>>> not, please say so. If you know where my questions would be more >>>>>>> appropriately sent, please advise. >>>>>>> >>>>>>> Further troubleshooting information: I've just opened up all traffic to >>>>>>> my server, and I'm still having issues. I have monitored the outside >>>>>>> interface of my firewall, and I see all traffic to-and-from the server >>>>>>> on port 443 traversing correctly. It does not look like anything is >>>>>>> being blocked. >>>>>>> >>>>>>> Thanks for any kind of help... >>>>>>> AL >>>>>>> >>>>>>> >>>>>>> Al Bsharah wrote, On 11:59 AM: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> I should add...I just followed the "Delete the Simias Data Store" >>>>>>>> procedure for the client, and it did something interesting, but didn't >>>>>>>> fix the issue. >>>>>>>> >>>>>>>> Upon trying to connect this time, it said that the server was not a >>>>>>>> trusted source (which is expected since SSL isn't completely >>>>>>>> configured). I clicked "Yes" and was half-expecting it to work...but >>>>>>>> ended up getting the same error message a few seconds later. >>>>>>>> >>>>>>>> "An error was encountered while connecting to the iFolder server. >>>>>>>> Please verify the information entered and try again. If the problem >>>>>>>> persists, please contact your network administrator." >>>>>>>> >>>>>>>> Thanks again for any insight... >>>>>>>> AL >>>>>>>> >>>>>>>> >>>>>>>> Al Bsharah wrote, On 11:59 AM: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Hi folks, >>>>>>>>> >>>>>>>>> Been messing with this system for a while, and really enjoying it. >>>>>>>>> My situation is that I can remotely connect via web to both the >>>>>>>>> /admin and /ifolder directories fine...but the client never connects. >>>>>>>>> Configuration: >>>>>>>>> >>>>>>>>> * Server is running on a Win2k3 Server under VMWare Server 2 >>>>>>>>> * Server is behind a firewall with ports 443 and 80 open (didn't know >>>>>>>>> if I needed both or not) >>>>>>>>> * Client is installed on a Win7 machine. >>>>>>>>> * I can connect via HTTPS to the server, from the Win7 machine just >>>>>>>>> fine. The client does not connect. >>>>>>>>> * A client on the same LAN as the server (behind the firewall) >>>>>>>>> connects just fine. >>>>>>>>> * The remote client (on Win7 machine) connects just fine to a local >>>>>>>>> iFolder server. >>>>>>>>> >>>>>>>>> Conclusions: >>>>>>>>> >>>>>>>>> * The Win7 client seems fine, as it's connecting to a local machine. >>>>>>>>> * The remote server seems fine because a client connection from the >>>>>>>>> same LAN works fine. >>>>>>>>> * The firewall seems fine because I can connect remotely via HTTPS >>>>>>>>> >>>>>>>>> ..so now what? I'm spreading my *nix wings, so go easy on me, as I'm >>>>>>>>> far from an expert. I'd love to hear some troubleshooting options I >>>>>>>>> might have to figure this out! >>>>>>>>> >>>>>>>>> Thanks much! >>>>>>>>> AL >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> ifolder-dev mailing list >>>>>>> [email protected] >>>>>>> http://forge.novell.com/mailman/listinfo/ifolder-dev >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev _______________________________________________ ifolder-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ifolder-devel
